|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-26-2024, 07:01 PM | #1 |
Member
Join Date: Jul 2013
Location: Weston,WV
Posts: 35
|
354 Ring an Pinion
Hello all
I am considering changing from a 378 to a 354 rear end In my Tudor sedan. What are the positives and negatives Of the switch ? Is it worth all the work involved to make the change ? Thanks Tom |
03-26-2024, 07:15 PM | #2 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 5,963
|
Re: 354 Ring an Pinion
If you drive in hill country you may not like having to shift down so often.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-26-2024, 07:27 PM | #3 | |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: 354 Ring an Pinion
Quote:
If you add a 7 to 1 head and a touring cam you will be enjoying as much fun driving as can be had with your clothes on. |
|
03-26-2024, 07:41 PM | #4 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: 354 Ring an Pinion
Tomscott, what year is your car? If it has 21 inch wheels, you can get the same overall gearing by fitting 5.25X21 tyres - about 5% higher. They are 6 ply rated so the walls are thicker and they are more stable in say, a cross wind. A pair of tyres will be cheaper than a new set of gears apart from all the extra work and if you don't like the higher gearing, changing back is easy. There will be someone willing to buy your 5,25 tyres.
All of that said, A Tudor is not the lightest Model A body so you will really notice the difference unless your engine is above original specs. IMO, a 6:1 head and a bigger carburettor is enough to get the extra oomph you will need. A hotter cam comes next. Pete, with respect, I cannot possibly agree with a Model A doing 65 all day - certainly not if you want the middle main bearing to survive the trip. For a long engine life, not much over 40 mph is all it is good for. Don't ask how I know!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
03-26-2024, 07:49 PM | #5 | |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: 354 Ring an Pinion
Quote:
Just remember, STOCK factory babbit bearings used to go 500 miles at well over 100 mph on dirt tracks. |
|
03-26-2024, 09:05 PM | #6 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: 354 Ring an Pinion
Sponsored Links (Register now to hide all advertisements)
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
03-26-2024, 09:18 PM | #7 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: 354 Ring an Pinion
|
03-26-2024, 09:51 PM | #8 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,375
|
Re: 354 Ring an Pinion
|
03-26-2024, 09:51 PM | #9 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: 354 Ring an Pinion
I assume he is associated with the Winfield heads but other than that, No.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
03-26-2024, 10:18 PM | #10 |
Senior Member
Join Date: Jan 2022
Posts: 721
|
Re: 354 Ring an Pinion
You can’t use both 3.54 gears and an overdrive, it’s too much for the banger to pull
|
03-26-2024, 10:31 PM | #11 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,356
|
Re: 354 Ring an Pinion
You've been carrying the torch for the 5.25s for years. Has anyone else on FB ever tried it? Seems like a lonely crusade.
|
03-26-2024, 10:36 PM | #12 |
Senior Member
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,885
|
Re: 354 Ring an Pinion
I have 3.25s in my roadster. They work just fine but the roadster is one of the lightest Model A's. I do not think they would be good in a heaver car unless you had a really good engine.
Chris W. |
03-26-2024, 11:36 PM | #13 | |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: 354 Ring an Pinion
Quote:
BTW, I run them with an O/D. The resulting over all gearing is like running a 2.85 diff only I have lower ratios when not in high ratio in the O/D. I find that a bit over geared when towing. For that, I run 16 inch wheels. That brings the overall back to about 3:1
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. Last edited by Synchro909; 03-27-2024 at 04:25 AM. |
|
03-26-2024, 11:39 PM | #14 |
Member
Join Date: Jan 2013
Location: Mangawhai NZ
Posts: 66
|
Re: 354 Ring an Pinion
I have a 30 Roadster with 3.54 diff and 25% Laycock OD and i love it. My 30 Coup is 3.78 diff and 27% Laycock od and hard to tell the difference.
Cheers Rosco. |
03-27-2024, 12:03 AM | #15 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,356
|
Re: 354 Ring an Pinion
|
03-27-2024, 01:23 AM | #16 |
Senior Member
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,998
|
Re: 354 Ring an Pinion
Tom, I saw your pm but am replying here as well …. I have a 3.54 in my 30 tudor, Stock engine but w/snyder 5.5 head and I run an older Ryan overdrive 23percent . It is a great highway cruiser. I personally like the 3.54 because it enables the car to cruise a little bit easier in town without using overdrive for all around use.
I think it depends a lot on your engine. Not all are created equal… helping to experiment with carb may help as well… like trying a B carb. If running A Mitchell 26 percent on a heavier sedan I would probably stick with 3.78 but without it I would defiantly opt for 3.54. I know some of the roads in wv are mountainess but I think with a 5.5 head it will help you pull the hills better. I’m not a huge fan of the 6.1 head as it gives the engine a rumble I generally don’t like… just my 2 cents worth. I have driven this same tudor extensively in Colorado and up pikes peak…. Million dollar highway, San Juan mountains, ouray etc…. And it had done fabulous. Shift when you need but overall I am very happy with the 3.54 and my Ryan overdrive in it. When I finish my 68c it will have a 3.54 and mitchell 26 percent and it should do fine as well w 5.5 head. Unless I put in a Burtz and then I’m really not worried! This is a lighter car than the sedans. I say go for it. Will you need to shift a tad earlier on a long grade, maybe so but it will be a negligible difference compared to the less rpm with it on the downhill side. I’ve restored /rebuilt hundreds of rear axles and overall I like the 3:54. I say get it while it’s available because there is a day coming these will not be available due to the demand vs economy of production/profit of making/selling them. Happy Model A motoring …. Larry Shepard |
03-27-2024, 04:27 AM | #17 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: 354 Ring an Pinion
No. I figure if I get a flat, I put the same size wheels on the back and the others on the front so the diff is not working all of the time. It would only be for a very short time till I mend he puncture.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
03-27-2024, 06:42 AM | #18 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,520
|
Re: 354 Ring an Pinion
So you just carry two jacks??
|
03-27-2024, 07:24 AM | #19 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,520
|
Re: 354 Ring an Pinion
Tom, there is an improvement as far as longevity of the engine is concerned (-due to lower RPMs at the same speed) however to fully answer your question giving Pros & Cons, the present condition of your engine factors in greatly. Most Model-A engines that I see are producing well below the rated 40 horsepower that Ford originally designed their engines to produce. Pete is pretty accurate in that a new Model-A was capable of being operated at 60+ mph for long periods. Most Model-A engines today that have a worn camshaft, or poorly sealing valves, leaking compression, etc. are barely capable of maintaining 45 mph, -much less 55-60 mph. If this somewhat describes your Model-A engine, then a 3.54 ring & pinion is not something you are going to be happy with. Even some of the so-called camshafts in 'Touring Engines' struggle due to the reground camshaft profile. On the other hand, a correctly rebuilt Model-A engine with either a new Stipe or Burtz camshaft, along with modern valves and one-piece guides will be a game changer and your Tudor will capably pull those W Virginia hills.
. . |
03-27-2024, 08:43 AM | #20 |
Senior Member
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,998
|
Re: 354 Ring an Pinion
Brent I totally agree…. The health of the engine is the major element and key. Many folks don’t realize how well they can and should be power wise when properly rebuilt, tuned, etc.
When I work in cars to whip then into shape it is a night and day difference when done. I am a fan of keeping the rpm’s down a bit for a number of reasons. Vibration, water pump, distributor, and you can talk to your passenger better when it’s not screaming at 55-60. My town sedan engine has quite a few miles on it but still can run that easily without overdrive. Many feel that their cars can’t do over 45…. And honestly in today’s traffic they need to on certain roads. Around here we can’t cross over the rivers without being on the highway as there is no other way. With a healthy engine a 3.54 should be fine in just about any A in my opinion. Larry |
03-27-2024, 08:51 AM | #21 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,900
|
Re: 354 Ring an Pinion
I ran a very stock 1930 coupe, with 3.78 gears, in the 1960's all over California. I drove at 50 to 55. I got passed by the trucks on the flats but passed the same trucks on grades. Going down grades I just kicked it out of gear.
The gearing depends on where you drive, flats or hills, if you take the interstate or back roads, and how much torque your engine can deliver. The overdrive is the way to go as it provides you both the performance on hills and flats.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
03-27-2024, 09:28 AM | #22 |
Member
Join Date: Jul 2013
Location: Weston,WV
Posts: 35
|
Re: 354 Ring an Pinion
Thanks for all your help !
I do have a 5.5 head on a fairly strong engine. I do not plan to run an overdrive. Running a 354 may be a good fit for me. Thanks. Tom |
Sponsored Links (Register now to hide all advertisements) |
|
03-27-2024, 10:01 AM | #23 |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,339
|
Re: 354 Ring an Pinion
A friend installed a 3.54 gear in his '30 coupe and after a few months went back to the 3.78's. He said the 3.54 gear wasn't that much of a improvement and just aggravated the gear spacing between 2nd and 3rd gear.
__________________
Ruth "Sometimes you really DO need to read the whole thread" |
03-27-2024, 10:16 AM | #24 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 2,989
|
Re: 354 Ring an Pinion
I have a 31 coupe with a Mitchell OD and 3.54 gears.I know nothing about the engine,the car was off the road for over 20 years before I got it and put the OD in it.I only found it had the high gears when I pulled a trumpet off to fix a leak.I have zero drivability problems,on flat going I forget and leave it in OD a lot of times.I would like to put higher gears or an OD in a 28 phaeton I have,but it is the early one with the different ring and pinion design.
|
03-27-2024, 10:16 AM | #25 |
Senior Member
Join Date: Mar 2011
Location: Mebane, NC
Posts: 188
|
Re: 354 Ring an Pinion
Nice thing about the overdrive is the ability to "split gears".
I would imagine that 2nd gear in overdrive is a very useful ratio . |
03-27-2024, 10:33 AM | #26 |
Member
Join Date: Dec 2023
Location: Rhode Island
Posts: 66
|
Re: 354 Ring an Pinion
Sponsored Links (Register now to hide all advertisements)
__________________
Early 1931 Coupe Member of the Little Rhody Model A Club (MAFCA & MARC) |
03-27-2024, 10:38 AM | #27 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,520
|
Re: 354 Ring an Pinion
Quote:
Yes, then with what you are saying, a 3.54 will be a good fit. Just understand that this is only about a 7% increase in speed, or about 3½ more mph to your existing speed. That is why a 3.27 is popular because they add about 8 more mph. The improvement happens when you are able to drop your engine RPMs by 7%. A stock R&P with a typical 4.75x19 tire requires about 2600 RPMs to drive around 60 mph. Using a 3.54 ratio allows the RPMs to drop to about 2425 RPMs. |
|
03-27-2024, 10:55 AM | #28 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 2,989
|
Re: 354 Ring an Pinion
I don't care that much about the speed,I just like to keep the RPM's down.I did buy two sets of 3.27's a few years ago when the rumor went around that they were going to get scarce.I've never used them,but 99% of my A driving is on 45 MPH roads so I won't be going that route.Years ago I ran an old Harley with the biggest sprocket I could find on the front,and the smallest I could find on the rear.60 MPH was just a high idle.It had plenty of torque to handle it,but in traffic my foot had to constantly slip the clutch.
|
03-27-2024, 05:37 PM | #29 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,354
|
Re: 354 Ring an Pinion
I have a Tudor as well. Winfield su1 cam, hogged intake and B carb, lightened flywheel an counter balanced crank, with electronic ignition. Put a 3:54 in two years ago. Love it on the flats or freeway, but miss the zip on steep hills.
|
03-27-2024, 05:48 PM | #30 | |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: 354 Ring an Pinion
Quote:
The SU1 is too much cam for that engine. |
|
03-27-2024, 06:20 PM | #31 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: 354 Ring an Pinion
IMO, You are quite right. I have a Mitchell O/D in all 4 of my Model As and one of their synchro gearboxes in one. I drive all of them like a 5 speed, especially the one with synchro in the gearbox.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
03-28-2024, 07:12 AM | #32 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,520
|
Re: 354 Ring an Pinion
But Pete, if a little cam is good, then a bigger cam has got to be better!!
|
03-28-2024, 12:12 PM | #33 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: 354 Ring an Pinion
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|