|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-18-2023, 01:45 PM | #1 |
Junior Member
Join Date: Jul 2023
Location: Warm Springs, Ga
Posts: 17
|
39 ford glovebox lock removal
I'm taking out the glovebox lock to get the code to have a key made. I pulled off the spring clip thinking I could remove the arm that locks the glovebox, no luck. I removed the screws holding it to the door. How do I get it out of the glovebox door?
|
11-19-2023, 08:11 AM | #2 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,834
|
Re: 39 ford glovebox lock removal
Pretty sure the lock cyl with the arm attached slides out the back once you remove the clip.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-19-2023, 08:13 AM | #3 |
Junior Member
Join Date: Jul 2023
Location: Warm Springs, Ga
Posts: 17
|
Re: 39 ford glovebox lock removal
I was trying to rtake it out the front. Let me try that.
|
11-19-2023, 08:39 AM | #4 |
Senior Member
Join Date: May 2012
Location: Raleigh, NC 27616
Posts: 208
|
Re: 39 ford glovebox lock removal
Once you have it out, let me know the code and I can cut you a key to code.
FlatHeadCoupe John McClure 919-559-5774 |
11-19-2023, 03:23 PM | #5 |
Junior Member
Join Date: Jul 2023
Location: Warm Springs, Ga
Posts: 17
|
Re: 39 ford glovebox lock removal
Ok folks, I finally got the cylinder out. There is a small roll pin through the little arm that locks the glovebox door. I pried it up but not out completely and it allowed the lock to come out of the glovebox door hole.
|
11-26-2023, 07:28 AM | #6 |
Junior Member
Join Date: Jul 2023
Location: Warm Springs, Ga
Posts: 17
|
Re: 39 ford glovebox lock removal
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|