Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-26-2018, 02:56 PM   #1
28PHAETONROY
Junior Member
 
Join Date: Apr 2013
Location: Hagerstown, MD
Posts: 25
Default Question about 28 phaeton top bow

Hi all,
I am working on the top bows for my 28 Phaeton. My question is about the second bow back, the one just behind the driver's head. There is a slight hump or curve in one edge of the wood part on that bow. Most photos I see show the curved part facing up, toward the top material, but I have seen some photos showing the curved part down. Mine is down. While I have the bows apart, I thought I would put it back together correctly.
Anyone have definitive info on this? Photos of a national winner showing the correct orientation?
Thanks,
Roy in Maryland
28PHAETONROY is offline   Reply With Quote
Old 12-26-2018, 03:30 PM   #2
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 10,405
Default Re: Question about 28 phaeton top bow

Sponsored Links (Register now to hide all advertisements)
Check your PMs
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:41 AM.