41 ford 1/2 ton seat/other parts

[Mike in Mass]

I just picked up a collection of 41 pic-up parts. original bench seat is all there ,will need to be coverd or use as is ,the back is just springs .125.00 . tailgate, rough with dings an dangs ,75.00. colume tube and rod with steering box an arm . was told the box is sloppy and needs work -no wheel or drop 45.00 for the tube. 50.00 for the rod an box. . misc cab mounting wood blocks -20.00. original set of dust covers that mount under the bed in front of the rear wheel .45.00 e-brake handle 60.00 . hood nose emblem,needs a re-crome and a drilled hole filled ,40.00 . I have other little stuff in boxes thats all I can think of right now I will ship these parts at your cost , pix on request, and I will try to load some up mike p 617-529-4846

[Mike in Mass]

allso have a side window glass Idon,t know what side . and a set of window regulators

[Mike in Mass]

some pix .

[Mike in Mass]

1935 ford firewall,windshield frame ,cowl vent . all together 450.00 I CAN CUT THE FIREWALL OUT FOR . 300

[Mike in Mass]

1935 rear section fordor humpback sedan . 300.00

[Mike in Mass]

Sponsored Links (Register now to hide all advertisements)

seat . I was told this was a 41 seat I have another set that is just the metal springs , good for parts I guess I WAS TOLD BY A GOOD FRIEND ON THE BARN THESE ARE "BIG TRUCK SEATS ! because of the little hinge . thats why this place is awsum ,,,,always learning

[Mike in Mass]

tailgate ,, rough but ready . 75.00 plus the ride,,,, SOLD ,,,,PENDING PAYMENT

[Mike in Mass]

41 hood nose parts triangle latch grab part 65.00 black bar with diagonal braces SOLD .plus the ride

[Mike in Mass]

btt 36 rear bumber ,with irons and bumperetts ,arrow straight ,needs a re-chrome ,or use as is 175.00 plus shipping , brand new in the box 1949 oilpan with sump 80.00 , lots of small 49 parts , generater ,fan , 2 ballel intake ,carbs

[Mike in Mass]

Btt