|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-10-2024, 05:35 PM | #1 |
Member
Join Date: Aug 2013
Location: Rochester WA
Posts: 34
|
Need Cylinder Head
I stupidly moved my 29A into my unheated shop last summer without checking to see if I had enough antifreeze. (For years the car was in my heated garage).
During a cold snap here in western Washington in January the head froze and cracked. (Never gets cold enough inside a shop in western WA to freeze?) Anyway is there anyone, preferably in the Seattle to Portland area that has a good spare head for a 29 motor for a reasonable price that they are willing to sell? If so send me a private message. I am located a little south of Olympia. Thanks |
03-10-2024, 05:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 2,990
|
Re: Need Cylinder Head
You are an extremely lucky guy if just the head cracked.When they crack enough for the head to crack they are usually cracked in the front of the block under the water pump,and on the left side of the block where it rolls down under to meet the cylinders.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-10-2024, 05:54 PM | #3 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,033
|
Re: Need Cylinder Head
Be sure to contact your local club as shipping probably will be more than the price of the head. Good aftermarket high compression heads have destroyed the value of original heads.
Charlie Stephens |
03-10-2024, 06:07 PM | #4 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,354
|
Re: Need Cylinder Head
Are you going to the almost spring swap meet this weekend at the Puyallup fairgrounds? It’s sponsored by the galloping Gerties model A club. If you want to come, I can pretty much guarantee a head. I’ll be there all weekend as I’m in charge of outside vendor support. Let me know, and I’ll be sure someone brings a decent head. I also will have a running repaired engine in a test stand for sale.
|
03-10-2024, 11:27 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 2,599
|
Re: Need Cylinder Head
...
Last edited by Benson; 03-11-2024 at 08:11 PM. |
03-11-2024, 12:22 AM | #6 |
Member
Join Date: Aug 2013
Location: Rochester WA
Posts: 34
|
Re: Need Cylinder Head
Sponsored Links (Register now to hide all advertisements)
Thanks |
03-11-2024, 06:17 PM | #7 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: Need Cylinder Head
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! Last edited by katy; 03-11-2024 at 06:17 PM. Reason: addition |
|
|
Sponsored Links (Register now to hide all advertisements) |
|