The Ford Barn

41-steel- · 07-17-2013, 06:15 AM

Does any body know if the doors for a 38/39 pickup are the same for a 38/39 panel truck ?

Thanks Ben

Sid the Maineiac · 07-17-2013, 07:33 AM

Ben, the pickup has a rounded corner at top rear and the panel has a pointed corner. Only difference I am aware of. Hope this helps!

41-steel- · 07-17-2013, 08:34 AM

Thanks Sid, i can see it now in pictures from google.

Lamar Wadsworth · 07-27-2013, 10:38 AM

Sponsored Links (Register now to hide all advertisements)

If you can find a truck door(s) you can make them work, just fit them in the door openings on the panel, then make you a pattern to make a filler piece to weld onto the upper rear corner of the door to make it squared off like a panel truck door. Lot easier to find a door from a pickup or big truck and make it work.

07-17-2013, 06:15 AM	#1
41-steel- Senior Member Join Date: Jul 2012 Location: England. Posts: 106	38 39 ford pickup / panel truck... Does any body know if the doors for a 38/39 pickup are the same for a 38/39 panel truck ? Thanks Ben

07-17-2013, 07:33 AM	#2
Sid the Maineiac Senior Member Join Date: May 2010 Location: Norridgewock,Maine Posts: 657	Re: 38 39 ford pickup / panel truck... Ben, the pickup has a rounded corner at top rear and the panel has a pointed corner. Only difference I am aware of. Hope this helps!

07-17-2013, 08:34 AM	#3
41-steel- Senior Member Join Date: Jul 2012 Location: England. Posts: 106	Re: 38 39 ford pickup / panel truck... Thanks Sid, i can see it now in pictures from google.

07-27-2013, 10:38 AM	#4
Lamar Wadsworth Senior Member Join Date: May 2010 Posts: 314	Re: 38 39 ford pickup / panel truck... Sponsored Links (Register now to hide all advertisements) If you can find a truck door(s) you can make them work, just fit them in the door openings on the panel, then make you a pattern to make a filler piece to weld onto the upper rear corner of the door to make it squared off like a panel truck door. Lot easier to find a door from a pickup or big truck and make it work.