|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-11-2019, 05:04 PM | #1 |
Senior Member
Join Date: May 2010
Location: Encino California, near Burbank
Posts: 935
|
Winfield Carb Spray Tube
Looking to complete a Winfield size C throttle. Because of the different sizes, I need to know the length of the spray tube, part S10C to aid in my shopping. The price of complete style S and SR winfields has made their practical use more difficult. Ethanol fuels seem to make reading the plugs for mixture adjustments also more difficult. Now this is for the C size. Since the banger types are very likely to use the Winfield carbs, I'll go over there to ask also. Thanks: Fred A
|
01-11-2019, 06:14 PM | #2 |
Senior Member
Join Date: May 2010
Location: Middletown Pa
Posts: 391
|
Re: Winfield Carb Spray Tube
I can't seem to upload a photo best I can do is give some measurements. Total length is 2 3/8 inches. Length of spray tube is 1 3/4 inches. Dia. of spray tube is 1/4 inches and dia. of knurled end is 5/16. Hope this helps.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-11-2019, 06:14 PM | #3 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 936
|
Re: Winfield Carb Spray Tube
The guy in the middle could tell you. Kong Jackson on the left and me on the right. Ed was pretty smart. I ran two downdrafts on that B engine
|
01-11-2019, 11:56 PM | #4 |
Senior Member
Join Date: May 2010
Location: Encino California, near Burbank
Posts: 935
|
Re: Winfield Carb Spray Tube
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|