Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-19-2013, 07:09 AM   #1
GSCOV
Senior Member
 
Join Date: May 2010
Location: Connecticut
Posts: 960
Default 1932 open trans swap and keep speedo ?

Need help on installing an open drive 3 speed with 39 box in stock 32 K member. How do you get a speedometer drive with this set up? The truck rear mount on the trans now has to be replaced with the 32 rubber ring style. What becomes of the speedo drive? Thanks in advance.
GSCOV is offline   Reply With Quote
Old 03-19-2013, 07:30 AM   #2
Juergen
Senior Member
 
Join Date: May 2010
Posts: 503
Default Re: 1932 open trans swap and keep speedo ?

One approach is to make it work with the truck rear mount, perhaps modifying the frame's trans crossmember to match the later style since you are modifying the frame anyhow for the open drive.
Juergen is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-19-2013, 07:36 AM   #3
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,772
Default Re: 1932 open trans swap and keep speedo ?

Sponsored Links (Register now to hide all advertisements)
You can't replace the rear truck mount with the 32 mount. You need the truck mount to support the open drive yoke. You will have to fabricate a part that attaches to the K member and will provide places to mount the truck mount support biscuits.
Andy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:38 AM.