|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-19-2020, 07:47 AM | #1 |
Junior Member
Join Date: Sep 2011
Posts: 18
|
Engine Machining
Can anybody recommend a machine shop in Southern California? I've got some burnt valves in my 29 Coupe and want to put inserts in the block. Probably hone the cylinders at the same time. Thanks
|
01-19-2020, 11:00 AM | #2 |
Senior Member
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,998
|
Re: Engine Machining
I would call Arlyn Bieber at Hansens Model A garage in San Diego. Aryln does engines and they are schooled at all the mechanicals. I'll update back here shortly with the correct phone number.....
Larry |
Sponsored Links (Register now to hide all advertisements) |
|
01-19-2020, 12:11 PM | #3 |
Member
Join Date: Feb 2011
Posts: 74
|
Re: Engine Machining
H&H Machine is in Southern Cal, significant Model A experience
|
01-19-2020, 12:45 PM | #4 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,046
|
Re: Engine Machining
Wherever you decide to go check them out in the archives here and on HAMB. The "&" symbol confuses the search engine so if looking for a company with that in their name go to Google and search for "X&Y on HAMB" or "X&Y" on fordbarn. Please post your experience as I will be looking for something in the future.
Charlie Stephens |
01-19-2020, 02:37 PM | #5 |
BANNED
Join Date: May 2018
Location: Outside Windy City
Posts: 22
|
Re: Engine Machining
I would go with Larrys pick as he has experience in this dept.
|
01-19-2020, 02:41 PM | #6 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Engine Machining
Sponsored Links (Register now to hide all advertisements)
|
01-19-2020, 03:33 PM | #7 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,775
|
Re: Engine Machining
Here is an engine said to be from H&H.
|
01-19-2020, 04:10 PM | #8 |
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,059
|
Re: Engine Machining
Chances are if those two pictures go together, the second one caused the first. It would be interesting to see the inside of the block, and at what RPM the motor was turning when it came apart. Also would be interesting to see the details on the crank. From the picture it looks like a "B" crank with welded on counterweights and ground to "A" dimensions. There was a place in Lancaster, Adams Metalizing. They have done sleeves for me, not sure if they do seats. John
__________________
As Carroll Smith wrote; All Failures are Human in Origin. |
01-19-2020, 04:28 PM | #9 |
Junior Member
Join Date: Sep 2011
Posts: 18
|
Re: Engine Machining
I tried googling Hansen's Model A Garage in San Diego and Arlyn Bieber. Maybe I'm missing it - -but I don't see the place you are recommending.
|
01-19-2020, 04:48 PM | #10 | |
Junior Member
Join Date: Sep 2011
Posts: 18
|
Re: Engine Machining
Quote:
The small piece they had added as a thrust bearing had fallen off and ended up in the pan. I took it back to them and they wanted $250 to fix it (reinstall the thrust surface and turn the crank). I junked the engine. They have changed this design in engines I now see at swap meets. New design looks better - -larger thrust area. The pictures below don't surprise me. |
|
01-19-2020, 04:54 PM | #11 | |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,376
|
Re: Engine Machining
Quote:
https://www.fordbarn.com/forum/member.php?u=1451 |
|
01-19-2020, 04:56 PM | #12 | |
Junior Member
Join Date: Sep 2011
Posts: 18
|
Re: Engine Machining
Quote:
I'm told unleaded gas is tough of the exhaust valves because it burns hotter. I have no data to support this, but the new valves are stainless, and stainless inserts don't burn like the stock block does in my experience. I have no idea why it's always been the first cylinder. Maybe leaner? |
|
01-19-2020, 05:25 PM | #13 | |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,376
|
Re: Engine Machining
Quote:
https://youtu.be/N5kDrtTJGsU?t=3134 And here for valve seats: https://youtu.be/N5kDrtTJGsU?t=3375 |
|
01-19-2020, 05:30 PM | #14 | |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,523
|
Re: Engine Machining
Quote:
IMO, fitting hardened seats in a Model A engine should ONLY be done as a last resort. I've never done it and can't see that I ever will. The OP is doing the right thing seeking advice before parting with his hard earned.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
01-19-2020, 06:02 PM | #15 | |
Senior Member
Join Date: May 2010
Location: 60615,330th Ave.,Clare, Iowa, 50524
Posts: 1,457
|
Re: Engine Machining
Quote:
We are shooting a 100%, in 55 years. Herm. |
|
01-19-2020, 08:36 PM | #16 | |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,523
|
Re: Engine Machining
Quote:
BTW, I use a lead replacement in the fuel which doubles as an upper cylinder lubricant.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
01-20-2020, 10:57 AM | #17 | |
Senior Member
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,998
|
Re: Engine Machining
Quote:
Just my take Larry |
|
01-20-2020, 11:21 AM | #18 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,376
|
Re: Engine Machining
There may be some terminology confusion here, I believe the OP wanted insert valve seats, not insert crankshaft bearings.
|
01-20-2020, 02:21 PM | #19 |
Senior Member
Join Date: May 2010
Location: La Mesa Ca
Posts: 1,169
|
Re: Engine Machining
Hansens Garage 760-789-8296
|
01-20-2020, 06:06 PM | #20 | |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,356
|
Re: Engine Machining
Quote:
|
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|