|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Mar 2017
Location: southern California
Posts: 725
|
![]()
I'll be rebuilding the front end soon, but I want to complete my research first.
I've seen a couple of posts about this subject. Those posts are hiding from me, like fame and fortune. Steel. We all know this is the original material. Its durable and cheap, but pressed steel parts make lousy bearing surfaces, even when greased. Teflon: The suppliers sell them. To me this is an odd choice because Teflon is a fairly soft material. In this application its taking a lot of direct and forceful impacts. I'm not saying they don't work, I'm just surprised if they last. I like Teflon, it has many great applications, but I'm not sure about this one. Bronze: One of the best bearing materials out there, even if you forget the grease. Do they exist? Have they ever? Is someone making them? I know I've seen something about them...somewhere. I can't say they are better or worse, I've seen no reviews. I like the idea though. (edit 9-23-2020 2158: This is not bronze impregnated Teflon) Does someone have information about bronze cups availability and performance? .
__________________
"That's my wild unsubstantiated guess, and I'm sticking to it regardless of the facts!" Last edited by 1930-Pickup; 09-24-2020 at 12:02 AM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
![]()
MAC's has all three, take your pick. I have had Teflon in my Town Sedan for ~6 years now, no problems. I have never tried the bronze impregnated Teflon one. I think I would try them next time around. The bronze impregnated Teflon were not offered when I put my current set in.
Last edited by Y-Blockhead; 09-23-2020 at 11:36 PM. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 | |
Senior Member
Join Date: Mar 2017
Location: southern California
Posts: 725
|
![]() Quote:
OH wait! I see it now ![]() The suppliers agree with me I think, that the Teflon IS too soft. Sprinkling bronze into the Teflon as a 'fix' for that sounds really odd ![]()
__________________
"That's my wild unsubstantiated guess, and I'm sticking to it regardless of the facts!" Last edited by 1930-Pickup; 09-24-2020 at 12:05 AM. |
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,355
|
![]()
To me it feels like a simple tradeoff. Steel: durable but more friction. Teflon: easier steering but less durable. There isn't a "best" – you just pick whichever balance you prefer.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
![]()
Try Silcone based grease with PTFE for the teflon. (not other chassis lubes) Would you rather replace the worn seats over time or the steel balls ?
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,184
|
![]() Sponsored Links (Register now to hide all advertisements)
John
__________________
Welcome each day |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
![]()
I'm surprised that someone doesn't make the seats from bearing grade PEEK.
https://cncplastics.com/materials/pe...SAAEgKRXPD_BwE
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
![]() |
![]() |
![]() |
#8 | |
Senior Member
Join Date: Mar 2017
Location: southern California
Posts: 725
|
![]() Quote:
__________________
"That's my wild unsubstantiated guess, and I'm sticking to it regardless of the facts!" |
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Mar 2017
Location: southern California
Posts: 725
|
![]()
I'm surprised no one has any info on Bronze link cups. Anyone??
__________________
"That's my wild unsubstantiated guess, and I'm sticking to it regardless of the facts!" |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Jan 2018
Location: Greenwich, CT
Posts: 140
|
![]()
As duke36 says,
It's all about what's going to be easier to replace/repair down the road... So: Which of these various approaches will actually create the least amount of wear on which of the more complex/expensive systems? Cups are really inexpensive, and it seems to me that I should use whichever cups will wear out fastest since they are wearing down themselves not the balls on the other suspension parts. [ I'm close to fitting new springs and cups into the tubes and bolting my restored arms/shocks/tubes back on... Pat Musante has just finished installing new shackles and springs front and rear. Looking forward to the first time back on legit suspension since 1971] My thanks go out to the Barners and all the many folks who are helping keep the Ford legacy alive... TallyHo, John |
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Mar 2017
Location: southern California
Posts: 725
|
![]()
Thanks to those who contributed to this thread
To close out this thread... The original question was: "Does someone have information about bronze cups availability and performance?" Results: There was no information found about availability and performance. Comments: Bronze cups seem like an intriguing option. Perhaps someone will make them one day. Maybe that 'someone' will be me ![]()
__________________
"That's my wild unsubstantiated guess, and I'm sticking to it regardless of the facts!" |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|