Powder coating wheels

[bdotson]

What is a fair price for powder coating a wheels? Any one know of a place in the east texas area that does it at a reasonable price? thanks Buddy

[Bill W]

Don't know anout the Texas area but I had mine done at Gerard Tire in Charlotte, NC for $ 20.00 per wheal. I furnished the pant as they did not have the color that I needed but if you choose a color in stock by them it is still $20.00 per wheel.

Bill

[Mitch//pa]

i believe i paid about 70.00 a wheel that included everything, sandblasting, and materials.

[Bruce]

Our favorite powder coater charges $45/wheel for blast, undercoat, top coat, and bake using their powder. Stock colors are PD close -- easily within range of tones that your Model A friends would accept as bonafide and true-to-Henry. A bare frame with running board brackets runs $225 for blast and coating.

[ford31]

mine about a month ago(5 wheels) 280 for sand blasting and powder coated red,sand blasting is by the hour sunrisebeach,mo

[V4F]

Sponsored Links (Register now to hide all advertisements)

out here in n.ca. they charge $25/each . all included ......... steve

[Bill Cal.]

Steve,
Could you please tell me where you had your wheels done? Thanks, Bill

[Brentwood Bob]

Steve, would also be interested in powder coater. I was quoted from Les schwab at $268. for 4. demount, powder coat,remount, and balance-out the door. Bob

[Pacersw]

Sounds like some real good deals......Coker Tire is charging me $55.00 per wheel to powder-coat their new 19 inch wheels.

[denis4x4]

$50 a wheel to blast and powder coat here in Durango

[Mitch//pa]

I guess I over paid a little but they sure look and hold up great.

[bdotson]

Originally Posted by Mitch//pa

I guess I over paid a little but they sure look and hold up great.

I got a quote here for 100 each you bring the wheels in with the tires off. I think I can beat that even with the shipping

[Model A Man]

I got a quote here in california at a car show that had a vendor setup and I was quoted $125.00 per wheel.

[Mike V. Florida]

Originally Posted by bdotson

I got a quote here for 100 each you bring the wheels in with the tires off. I think I can beat that even with the shipping

About the same here in Florida

[Cape Codder]

What product can be used to fill spokes for smoothness prior to Powder Coating. I have always thought JB Weld could be used but don't know if it could hold up to the heat.

Thanks for your time.
Joe Grobleski
Cape Cod

[wrndln]

I used J-B Weld to fill some curb nicks and dings before powdercoating. It work fine.

[kenparker]

D-K Powder Coating in marshall, Texas does a beautiful job. That have done 10 wheels for me and at least 20 for friends of mine here in East Texas. Cost $40 or $45 per wheel if i 'member correctly. Ken

[kenparker]

Call D-K Powder Coating in Marshall, Texas. They do a beautiful job. They have done several sets of wheels for me and friends in the area. Ken

[rogeroadster]

Originally Posted by Cape Codder

What product can be used to fill spokes for smoothness prior to Powder Coating. I have always thought JB Weld could be used but don't know if it could hold up to the heat.

Thanks for your time.
Joe Grobleski
Cape Cod

Originally Posted by wrndln

I used J-B Weld to fill some curb nicks and dings before powdercoating. It work fine.

I've heard about JB Weld and also Eastwood recommends a product called Lab-Metal. Has anyone had any luck with it?

[bdotson]

Originally Posted by kenparker

Call D-K Powder Coating in Marshall, Texas. They do a beautiful job. They have done several sets of wheels for me and friends in the area. Ken

Thanks will do