The Ford Barn

Smurkey · 03-02-2013, 03:24 PM

Sponsored Links (Register now to hide all advertisements)

I swear I have seen this topic before here, but I'll be darned if I can find it again:

I have a 29 Murray TS and the hood sits lower (steps down) than the top of the cowl by about 3/16". I see no way of adjusting this.

I read here (I'm sure it was here) that the Town Sedans used a thicker cowl lacing to make up for the extra thickness of the cowl versus that of the standard cowl. I spent some time searching the forums, but cannot find it again...

Questions are: Where can one source this thicker lacing? Is lacing the answer to the step-down?

Thanks in advance!
Steve

03-02-2013, 03:24 PM	#1
Smurkey Senior Member Join Date: Nov 2011 Location: Esko, MN Posts: 257	Different Cowl Lacing Thicknesses Sponsored Links (Register now to hide all advertisements) I swear I have seen this topic before here, but I'll be darned if I can find it again: I have a 29 Murray TS and the hood sits lower (steps down) than the top of the cowl by about 3/16". I see no way of adjusting this. I read here (I'm sure it was here) that the Town Sedans used a thicker cowl lacing to make up for the extra thickness of the cowl versus that of the standard cowl. I spent some time searching the forums, but cannot find it again... Questions are: Where can one source this thicker lacing? Is lacing the answer to the step-down? Thanks in advance! Steve