|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-06-2014, 11:27 AM | #1 |
Member
Join Date: May 2010
Posts: 50
|
Tubes for my 6.00 x 16 tires
Hello Barners:
Can anyone recommend the proper tube for a 1937 Ford rim It looks like a 5/8 rim hole for the Valve stem to pass- through. Thank you. |
06-06-2014, 11:51 AM | #2 |
Senior Member
Join Date: Oct 2010
Location: Orem, Utah
Posts: 5,762
|
Re: Tubes for my 6.00 x 16 tires
I ordered some from Coker Tire but they were not right. Although they were listed as 6.00-16 they came with the radial size marking and the valve stem was too small for the hole in the rim. My local tire dealer got the right ones marked 550/600/650 X 16 that had the right size valve stem on it. I'd try your local tire store before ordering on line. Then you see what you get before buying.
__________________
Prof. Henry (The Roaming Gnome) "It is good to have an end to journey toward; but it is the journey that matters, in the end.” *Ursula K. Le Guin in The Left Hand of Darkness |
Sponsored Links (Register now to hide all advertisements) |
|
06-06-2014, 12:01 PM | #3 |
Senior Member
Join Date: May 2010
Location: Odessa, FL
Posts: 7,611
|
Re: Tubes for my 6.00 x 16 tires
Rich, try installing the larger valve stem, and running the bias tires tubeless. I know it works on our '39 CS with radial tires, it should work with the bias tires...
__________________
Imagination is more important than knowledge. |
06-06-2014, 02:07 PM | #4 |
Senior Member
Join Date: May 2010
Location: NW Arkansas
Posts: 361
|
Re: Tubes for my 6.00 x 16 tires
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|