The Ford Barn

Lil Nick · 04-14-2014, 04:24 AM

Could anyone assist me with any advise on removing the pin from the window winder handle, so that I can remove the handle to remove the regulator.
The handle has the sprung type chrome bezel behind it, which makes it very difficult to hold back, whilst attempting to knock the pin through.
Any advise would be appreciated.

Ed Saniewski · 04-14-2014, 04:59 AM

I have not found ant trick to doing this. I just push in on the escutchion as much as I can with one hand, then drive the pin on the handle with a small punch in the other hand

Tom Wesenberg · 04-14-2014, 07:49 AM

I do it just as Ed said, but I use a piece of stiff wire, such as a paper clip. The pin is a loose fit and held in place by the escutcheon.

wrndln · 04-14-2014, 08:04 AM

Speaking of 28/29 CCPU window regulators, are they the same coupe and tudor window regulators? I see in model A parts catalogs, truck window regulators are listed with coupe and tudor regulators, but sometimes parts vendors take some liberties in what items fit (i.e. they might need some "fitting" or modifications).
Rusty Nelson

Lil Nick · 04-14-2014, 08:27 AM

Sponsored Links (Register now to hide all advertisements)

Thanks guys, appreciate your assistance.

04-14-2014, 04:24 AM	#1
Lil Nick Member Join Date: Sep 2012 Location: Wokingham, England Posts: 65	29 Closed Cab Pickup Window Winder Handle Could anyone assist me with any advise on removing the pin from the window winder handle, so that I can remove the handle to remove the regulator. The handle has the sprung type chrome bezel behind it, which makes it very difficult to hold back, whilst attempting to knock the pin through. Any advise would be appreciated.

04-14-2014, 04:59 AM	#2
Ed Saniewski Senior Member Join Date: May 2010 Location: Denville NJ Posts: 964	Re: 29 Closed Cab Pickup Window Winder Handle I have not found ant trick to doing this. I just push in on the escutchion as much as I can with one hand, then drive the pin on the handle with a small punch in the other hand __________________ Model A Ford Club of New Jersey http://www.mafcnj.org Model A Pick Up Owners and Enthusiasts https://www.fordbarn.com/forum/group.php?groupid=5

04-14-2014, 07:49 AM	#3
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: 29 Closed Cab Pickup Window Winder Handle I do it just as Ed said, but I use a piece of stiff wire, such as a paper clip. The pin is a loose fit and held in place by the escutcheon.

04-14-2014, 08:04 AM	#4
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,164	Re: 29 Closed Cab Pickup Window Winder Handle Speaking of 28/29 CCPU window regulators, are they the same coupe and tudor window regulators? I see in model A parts catalogs, truck window regulators are listed with coupe and tudor regulators, but sometimes parts vendors take some liberties in what items fit (i.e. they might need some "fitting" or modifications). Rusty Nelson

04-14-2014, 08:27 AM	#5
Lil Nick Member Join Date: Sep 2012 Location: Wokingham, England Posts: 65	Re: 29 Closed Cab Pickup Window Winder Handle Sponsored Links (Register now to hide all advertisements) Thanks guys, appreciate your assistance.