The Ford Barn

barry · 06-17-2010, 07:35 AM

anyone have any pointers on removing glass from the window channel intact in a 32. are there any tools that will help. thanks

FlatheadTed · 06-17-2010, 03:32 PM

Remove all of from the car ,Lay the glass on a table flat ,Use a block of wood flat against the glass at each end of the channel , hit the wood with a hammer even both ends ,

Jim NC · 06-17-2010, 09:07 PM

Sponsored Links (Register now to hide all advertisements)

I have used a 12" - 16" 1"X2" successfully - As Flathead Ted says - place wood on each end and tap out - I rest my fist holding the piece of wood on the glass - keeps glass from moving - and tap til it breaks loose alternating ends as necessary. Good luck.

06-17-2010, 07:35 AM	#1
barry Senior Member Join Date: May 2010 Posts: 146	removing glass from window channel anyone have any pointers on removing glass from the window channel intact in a 32. are there any tools that will help. thanks

06-17-2010, 03:32 PM	#2
FlatheadTed Senior Member Join Date: May 2010 Location: Auckland Posts: 4,705	Re: removing glass from window channel Remove all of from the car ,Lay the glass on a table flat ,Use a block of wood flat against the glass at each end of the channel , hit the wood with a hammer even both ends ,

06-17-2010, 09:07 PM	#3
Jim NC Senior Member Join Date: May 2010 Location: SE NC Posts: 446	Re: removing glass from window channel Sponsored Links (Register now to hide all advertisements) I have used a 12" - 16" 1"X2" successfully - As Flathead Ted says - place wood on each end and tap out - I rest my fist holding the piece of wood on the glass - keeps glass from moving - and tap til it breaks loose alternating ends as necessary. Good luck.