|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-10-2011, 01:25 AM | #1 |
Senior Member
Join Date: May 2010
Location: Qld, Australia
Posts: 4,216
|
33-34 diff cover plate
In my old 33 the plate that covers the rear end under the rear seat base is a big square sheet metal plate that someone has self tapper screwed in,
I see that there is a nice round recess under it,is the cover that should be in there a wooden plate like the battery lid or a steel pressing, Any one have a pic of what should be there. Thanks Lawrie |
12-10-2011, 01:58 AM | #2 |
Senior Member
Join Date: Jun 2011
Location: South Dakota
Posts: 405
|
Re: 33-34 diff cover plate
I just got a diff cover plate from MAC's. It measures 12 inches diameter and it is perfectly round. My 33 is a 4 cyl but I think is the same for the V8. I am trying to upload 2 pictures for you. Hopefully they will come up.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-10-2011, 09:55 AM | #3 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: 33-34 diff cover plate
The round stamped steel cover was used originally on sedans, phaetons, and coupes and standard roadsters without a rumble seat. Deluxe roadsters, cabriolets, and coupes with rumble seats used a fabric cover (with a spring wire retaining ring sewn into the perimeter) that snapped into slots in the sides of the opening in the floor pan.
|
12-10-2011, 05:17 PM | #4 |
Senior Member
Join Date: May 2010
Location: Qld, Australia
Posts: 4,216
|
Re: 33-34 diff cover plate
Thanks,I think I will make up a plate,
the sheet metal one that was screwed in there was flat so maybe I dont need the domed one. Lawrie |
12-10-2011, 07:53 PM | #5 |
Senior Member
Join Date: May 2010
Location: West Coast Canada B.C. Interior
Posts: 332
|
Re: 33-34 diff cover plate
Lawrie.. Re the Diff cover plate, I went to the Thrift store and bought an old Aluminum fry pan, the right Diameter, and cut the rim down with a scroll saw; to the right size and hammered it on a block of wood to dome shape it slightly, made up some clips (3) to hold it in place, painted it then when I was ready to make it permanent I sealed the edge with some asphalt sealer, looks good and is sealed JMO..
|
12-10-2011, 11:09 PM | #6 |
Senior Member
Join Date: May 2010
Location: Qld, Australia
Posts: 4,216
|
Re: 33-34 diff cover plate
Sponsored Links (Register now to hide all advertisements)
|
12-13-2011, 01:40 PM | #7 |
Member
Join Date: Oct 2010
Location: in the past!!
Posts: 35
|
Re: 33-34 diff cover plate
They are $32.00 from Howells, bob.
http://www.fordor.com/category.cfm?cat=1933 1934 Ford 5 Window Coupe&dept=3334ford |
|
|
Sponsored Links (Register now to hide all advertisements) |
|