The Ford Barn

Harms Way · 05-16-2012, 11:06 PM

Follow this link to see an amazing movie on building a New 1934 Ford !

https://www.youtube.com/watch?v=Nnexw...layer_embedded

BrianCT · 05-17-2012, 08:40 AM

This is a great clip. Those guys really earned their pay. Many interesting methods. Notice the striping tool.

48Flyer · 05-17-2012, 09:01 AM

Amazing!
Thank you for that

Lawson Cox · 05-17-2012, 09:20 AM

Quote:

Originally Posted by BrianCT

This is a great clip. Those guys really earned their pay. Many interesting methods. Notice the striping tool.

I didn't see anyone striping anything.

Harms Way · 05-17-2012, 09:31 AM

Quote:

Originally Posted by Lawson Cox

I didn't see anyone striping anything.

Factory "Pin Striping" done with a wheel striping tool.

David J · 05-17-2012, 12:07 PM

Sponsored Links (Register now to hide all advertisements)

Looks like the same folks did this as the "Rhapsody in Steel" film posted here a couple times . Looks like much of the same stuff . Neat stuff to say the least & I'd sure like to stock up on somma doze new grilles & fenders !!!!!!

Mart · 05-17-2012, 12:47 PM

Fantastic - never saw that one before - thank you very much indeed.

Mart.

Mark Slight · 05-17-2012, 01:52 PM

Thank you, I have never seen this movie before. I did attend the Henry Ford Trade School (T-section) at the Rouge Plant in Dearborn MI. It was next the the engine assenbly building. Long after the 1934 Ford was built. I was there in I951 and 1952 it looked much the same as in this movie. Mark

Gumpy · 05-17-2012, 06:33 PM

very nice video and loved the way the steel sections were stamped!

jerry grayson · 05-17-2012, 08:19 PM

Quote:

Originally Posted by Harms Way

Follow this link to see an amazing movie on building a New 1934 Ford !

https://www.youtube.com/watch?v=Nnexw...layer_embedded

Did you notice how they carefully measured the gasket thickness when they assembled the rear axle? Ha Ha

jerry grayson · 05-17-2012, 08:20 PM

Quote:

Originally Posted by Lawson Cox

I didn't see anyone striping anything.

The guy is striping a door with a striping tool, not a brush.

34ford · 05-17-2012, 09:38 PM

very interesting. nice pict.

Mart · 05-18-2012, 02:24 AM

I loved watching the grille getting stamped out. Good to see the processes involved.

In fact I like watching all the pressing operations.

And the forging.

And the assembly.

In fact there was nothing in there I didn't like!

Mart.

Brendan · 05-18-2012, 08:04 AM

Quote:

Originally Posted by jerry grayson

Did you notice how they carefully measured the gasket thickness when they assembled the rear axle? Ha Ha

yup they made it look easy!

Gumpy · 01-01-2015, 10:52 AM

enjoy it!

jimvette59 · 01-01-2015, 10:58 AM

It was taken down. Booooo.

BlueSunoco · 01-01-2015, 12:18 PM

Quote:

Originally Posted by Harms Way

Factory "Pin Striping" done with a wheel striping tool.

In the Model A video, Yokohama Fords, you see a guy using a brush to pin stripe the new cars. Narrator said it was very hard on your back!!

BlueSunoco · 01-01-2015, 12:19 PM

Quote:

Originally Posted by Harms Way

Follow this link to see an amazing movie on building a New 1934 Ford !

https://www.youtube.com/watch?v=Nnexw...layer_embedded

Tried it today, it has been pulled couldn't view it

stangblue · 01-01-2015, 03:03 PM

The stripping tool is called a Bugler.

outlaw · 01-01-2015, 11:23 PM

I can't view it either. Bill

Krylon32 · 01-02-2015, 06:06 AM

No can see, says unavailable

JM 35 Sedan · 01-02-2015, 08:11 AM

It was there in May of 2012

Gumpy · 01-02-2015, 11:04 AM

Here is a similar video of 1934 ford...Rapsody in steel

http://youtu.be/R6ABlsLoTgg

Brendan · 01-03-2015, 08:35 PM

I though my puter was messed up!

05-16-2012, 11:06 PM	#1
Harms Way Senior Member Join Date: May 2010 Location: Northern Mi. Posts: 295	Ford Movie,.. Building a NEW 1934 Ford ! Follow this link to see an amazing movie on building a New 1934 Ford ! https://www.youtube.com/watch?v=Nnexw...layer_embedded __________________ A sinner saved by Grace,......... Eph. 2:8-9

05-17-2012, 08:40 AM	#2
BrianCT Senior Member Join Date: May 2010 Location: Windham, CT Posts: 702	Re: Ford Movie,.. Building a NEW 1934 Ford ! This is a great clip. Those guys really earned their pay. Many interesting methods. Notice the striping tool. __________________ [FONT=Comic Sans MS]

05-17-2012, 09:01 AM	#3
48Flyer Senior Member Join Date: Jun 2010 Location: North of Minneapolis, MN Posts: 160	Re: Ford Movie,.. Building a NEW 1934 Ford ! Amazing! Thank you for that

05-17-2012, 12:07 PM	#6
David J Senior Member Join Date: Jun 2010 Location: St Croix Falls WI Posts: 2,080	Re: Ford Movie,.. Building a NEW 1934 Ford ! Sponsored Links (Register now to hide all advertisements) Looks like the same folks did this as the "Rhapsody in Steel" film posted here a couple times . Looks like much of the same stuff . Neat stuff to say the least & I'd sure like to stock up on somma doze new grilles & fenders !!!!!!

05-17-2012, 12:47 PM	#7
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,754	Re: Ford Movie,.. Building a NEW 1934 Ford ! Fantastic - never saw that one before - thank you very much indeed. Mart.

05-17-2012, 01:52 PM	#8
Mark Slight Senior Member Join Date: May 2010 Location: Dixon, CA Posts: 473	Re: Ford Movie,.. Building a NEW 1934 Ford ! Thank you, I have never seen this movie before. I did attend the Henry Ford Trade School (T-section) at the Rouge Plant in Dearborn MI. It was next the the engine assenbly building. Long after the 1934 Ford was built. I was there in I951 and 1952 it looked much the same as in this movie. Mark

05-17-2012, 06:33 PM	#9
Gumpy Senior Member Join Date: May 2010 Location: Sf bay area Posts: 1,464	Re: Ford Movie,.. Building a NEW 1934 Ford ! *very nice video and loved the way the steel sections were stamped!*

05-17-2012, 09:38 PM	#12
34ford Senior Member Join Date: May 2010 Location: franklin park ill. Posts: 174	Re: Ford Movie,.. Building a NEW 1934 Ford ! very interesting. nice pict.

05-18-2012, 02:24 AM	#13
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,754	Re: Ford Movie,.. Building a NEW 1934 Ford ! I loved watching the grille getting stamped out. Good to see the processes involved. In fact I like watching all the pressing operations. And the forging. And the assembly. In fact there was nothing in there I didn't like! Mart.

01-01-2015, 10:52 AM	#15
Gumpy Senior Member Join Date: May 2010 Location: Sf bay area Posts: 1,464	Re: Ford Movie,.. Building a NEW 1934 Ford ! *enjoy it!* __________________ "I believe God is managing affairs and that He doesn't need any advice from me. With God in Charge, I believe everything will work out for the best in the end. So what is there to worry about". Quote by Henry Ford

01-01-2015, 10:58 AM	#16
jimvette59 Senior Member Join Date: Jun 2010 Location: Perry OH Posts: 1,330	Re: Ford Movie,.. Building a NEW 1934 Ford ! It was taken down. Booooo.

01-01-2015, 03:03 PM	#19
stangblue Senior Member Join Date: Apr 2011 Location: Northern New Jersey Posts: 370	Re: Ford Movie,.. Building a NEW 1934 Ford ! The stripping tool is called a Bugler. __________________ Assumption is the mother of all foul-ups.

01-01-2015, 11:23 PM	#20
outlaw Senior Member Join Date: May 2010 Location: Eagle River,Alaska Posts: 353	Re: Ford Movie,.. Building a NEW 1934 Ford ! I can't view it either. Bill

01-02-2015, 06:06 AM	#21
Krylon32 Senior Member Join Date: May 2010 Posts: 4,484	Re: Ford Movie,.. Building a NEW 1934 Ford ! No can see, says unavailable

01-02-2015, 08:11 AM	#22
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Ford Movie,.. Building a NEW 1934 Ford ! It was there in May of 2012 __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

01-02-2015, 11:04 AM	#23
Gumpy Senior Member Join Date: May 2010 Location: Sf bay area Posts: 1,464	Re: Ford Movie,.. Building a NEW 1934 Ford ! Here is a similar video of 1934 ford...Rapsody in steel http://youtu.be/R6ABlsLoTgg __________________ "I believe God is managing affairs and that He doesn't need any advice from me. With God in Charge, I believe everything will work out for the best in the end. So what is there to worry about". Quote by Henry Ford

01-03-2015, 08:35 PM	#24
Brendan Senior Member Join Date: May 2010 Location: At my kitchen table in Santa Rosa, Ca Posts: 2,903	Re: Ford Movie,.. Building a NEW 1934 Ford ! I though my puter was messed up! __________________ If it would have been a snake it would have bit ya! i can't spell my way out of a paper bag!