Rod Bearings 32-38 .020--030

[Walt Dupont--Me.]

Can anyone tell me where I might get a set of rod bearing for 32-38 flathead .020 or .030 with the flange. I'd take them with the .004--.008 oversize OD if that was all they had. Thanks Walt

[George/Maine]

Hi Walt
Some how thru the internet I received a catalog from Kanter
They recond connecting rods for 59A exchange.
Has anyone used there parts ,anyone down in Augusta do rods ,
Do you recon your own. Kanter may have what you are looking for.

[bart78]

I think scat might have them.

[Walt Dupont--Me.]

Originally Posted by George/Maine

Hi Walt
Some how thru the internet I received a catalog from Kanter
They recond connecting rods for 59A exchange.
Has anyone used there parts ,anyone down in Augusta do rods ,
Do you recon your own. Kanter may have what you are looking for.

I don't know what you mean, 59A rods are larger on big end than early 2in. cranks. Any auto machine shop should be able to recon rods. I do my own on my Sunnen hone. Walt

[bart78]

Looks to be a bunch on eBay.

[Ken/Alabama]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Walt Dupont--Me.

Can anyone tell me where I might get a set of rod bearing for 32-38 flathead .020 or .030 with the flange. I'd take them with the .004--.008 oversize OD if that was all they had. Thanks Walt

Hey Walt, I will take a look. I probabaly got what you need.

[David J]

Only extra set like this I have . As you can see they are .030 - .008 and are gennie Ford and pretty minty on condition . Clueless as to a fair price as you rarely see these . Tons of std , .002 etc around but not the .020 - .030 ones .

Originally Posted by Walt Dupont--Me.

Can anyone tell me where I might get a set of rod bearing for 32-38 flathead .020 or .030 with the flange. I'd take them with the .004--.008 oversize OD if that was all they had. Thanks Walt

[B-O-B]

Walt try Joblot in NY thought I saw some there .

[russcc]

Walt, if Job Lot does not have them, contact Fred at Southside Obsolete in Faribault MN. I believe he goes under barnstuf08 on Fordbarn. Russ

[Chuck Kuntz]

I have three each of the .004-.030 and .008-.030. NOS Ford
Chuck

[Walt Dupont--Me.]

I want to thanks everyone on this thread about the rod brg. I was looking for. My friend found a set for his 36 and I found a set for a 37 engine I have to build. Thanks to this Ford Barn it would be hard to some of these thing. Thanks again, Walt

[felix37]

I just purchased some .030 from Fred at Southside Obsolete in Fairbault MN they were NOS FORD and very reasonable, I'm surprised he hasn't chimed in yet.

[felix37]

Here is Fred's number at South side Obsolete 507-332-6789

[barnfind08]

Walt told him to call me and I fixed him up thanks to everyone. I am glad to help. Cant keep my parts forever. Fred