The Ford Barn

Timstruck · 01-11-2019, 09:39 PM

I am looking for information on installing a cooling fan on a '35-'36 pickup. My project came with an electric fan and I would like to return it to stock or at least close to stock. I am using an alternator (12V) and while it is not stock, is there a way to adapt this to a fan? I am assuming that the fan mounts on the front of the generator via a bracket (which I don't have). Is that the only way it mounts? I have seen some pictures that shows the fan mounted lower than the generator but the pictures I have seen are not clear.

I will need to locate a fan/bracket (and possibly a shroud if that is what came on these).

Any info (and pics) is appreciated.

Thx.

01-11-2019, 09:39 PM	#1
Timstruck Member Join Date: Sep 2017 Location: North Carolina Posts: 73	Fan Install I am looking for information on installing a cooling fan on a '35-'36 pickup. My project came with an electric fan and I would like to return it to stock or at least close to stock. I am using an alternator (12V) and while it is not stock, is there a way to adapt this to a fan? I am assuming that the fan mounts on the front of the generator via a bracket (which I don't have). Is that the only way it mounts? I have seen some pictures that shows the fan mounted lower than the generator but the pictures I have seen are not clear. I will need to locate a fan/bracket (and possibly a shroud if that is what came on these). Any info (and pics) is appreciated. Thx.