35 3window glass channel question

[Jembow]

Took the glass out of both doors, now have forgotten which channel was which side! Appreciate your help

[petehoovie]

Originally Posted by Jembow

Took the glass out of both doors, now have forgotten which channel was which side! Appreciate your help

[Jembow]

Sorry, can't see your answer

[Jembow]

Or am I being dim and you mean the photo shows them in their correct relationship?

[petehoovie]

Originally Posted by Jembow

Or am I being dim and you mean the photo shows them in their correct relationship?

Yes...Photo only for clarity...

[325w]

Sponsored Links (Register now to hide all advertisements)

The rollers on the regulator go in the slides of the lower window channel. The regulator only goes in the door one way. Should answer the question.Usually the regulator rollers face the inner door structure.

[rich b]

R/H channel is on the right side in your picture.

[fordyford]

The channels look to be different lengths. Is the short one out of a 5 window?

[rich b]

Originally Posted by fordyford

The channels look to be different lengths. Is the short one out of a 5 window?

5W is configured differently.

Rotate the picture (or hold your phone sideways) it will look better.

[Jembow]

Thanks everyone. Tip from another thread which might help someone else - the hole for the guide pin is 15 1/4 ins from front edge of the glass.