The Ford Barn

jetmek · 07-17-2023, 02:13 PM

So have to ask what is the correct measurement from back of cover to the fingers? Im reading 11/16 or 3/4 depending on the source. Ive checked some old pressure plates with new disks and usually get 7/8 or close. Does it really matter what it is as long as they are all set the same?

Tom Endy · 07-17-2023, 04:26 PM

Attached is an article about how I do it.

http://www.santaanitaas.org/wp-conte...adjustment.pdf

Tom Endy

Patrick L. · 07-17-2023, 06:31 PM

Sponsored Links (Register now to hide all advertisements)

While on the bench I've set them at 5/8" and 11/16" and not had any issues or noticed anything different.
While in the car I just set them to contact at the same time.
Both ways set to within .002"

07-17-2023, 02:13 PM	#1
jetmek Senior Member Join Date: May 2010 Location: albany Posts: 466	Clutch finger adjustment So have to ask what is the correct measurement from back of cover to the fingers? Im reading 11/16 or 3/4 depending on the source. Ive checked some old pressure plates with new disks and usually get 7/8 or close. Does it really matter what it is as long as they are all set the same? __________________ engine and component overhauls my specialty! Website- www.godevilgarage.com

07-17-2023, 04:26 PM	#2
Tom Endy Senior Member Join Date: May 2010 Location: Southern California Posts: 3,131	Re: Clutch finger adjustment Attached is an article about how I do it. http://www.santaanitaas.org/wp-conte...adjustment.pdf Tom Endy

07-17-2023, 06:31 PM	#3
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Clutch finger adjustment Sponsored Links (Register now to hide all advertisements) While on the bench I've set them at 5/8" and 11/16" and not had any issues or noticed anything different. While in the car I just set them to contact at the same time. Both ways set to within .002"