|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-02-2019, 03:04 PM | #1 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Another "load-a-matic" day at bubbas.....
Another load-a-matic day at Bubbas , Had shorted lead wire under point plate , these are a bear to take apart with the press fit gear and staked drive pin etc...BUT clean up really well!!!!
|
10-02-2019, 03:37 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 4,751
|
Re: Another "load-a-matic" day at bubbas.....
Bubba could you post a photo of just the lead wire?? I wonder what the two ends look like.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-02-2019, 03:43 PM | #3 |
Senior Member
Join Date: Aug 2017
Location: ohio
Posts: 986
|
Re: Another "load-a-matic" day at bubbas.....
Bubba, that wire went bad in mine & when taken apart we found it had worn thru & some fool coated it with silicone.....instead of replacing it...yikes, some people.
Hope yer do'n well....a friend has gone down to 2 days a week....keep on keep'n on. mike |
10-02-2019, 04:46 PM | #4 |
Senior Member
Join Date: May 2015
Posts: 8,145
|
Re: Another "load-a-matic" day at bubbas.....
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
10-02-2019, 08:54 PM | #5 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: Another "load-a-matic" day at bubbas.....
|
10-02-2019, 08:54 PM | #6 | |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: Another "load-a-matic" day at bubbas.....
Sponsored Links (Register now to hide all advertisements)
Quote:
will do , i have a new box of oem leads .......give me a day or two..... |
|
10-04-2019, 09:58 AM | #7 | |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: Another "load-a-matic" day at bubbas.....
Quote:
Here ya go , i just got to the parts box with the new leads in it . A nos one ( not that anyone cares , its all the same at 35mph rbg.... and a new one note that the lead has a little ledge on it to prevent spinning..... |
|
10-04-2019, 11:05 AM | #8 |
Senior Member
Join Date: May 2010
Posts: 4,751
|
Re: Another "load-a-matic" day at bubbas.....
Thank You Bubba!
|
10-04-2019, 11:40 AM | #9 |
Senior Member
Join Date: May 2015
Posts: 8,145
|
Re: Another "load-a-matic" day at bubbas.....
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
|
Sponsored Links (Register now to hide all advertisements) |
|