The Ford Barn

flash9376 · 06-20-2019, 06:37 PM

I know the settings for the light switch are supposed to be clockwise-parking, 1 counter clockwise-low and 2 counter clockwise- high, but all 3 of the settings turn on all the lights, i.e. powers both bulbs in the lamp and the tail lamp.

My car is technically my dad's even though I;m the one who restored it and it's kept at his house. He tends to tinker around with things and I know he "rebuild" the light switch rod and reattached everything. They worked fine last summer but now that it's been tinkered with, I'm getting the above issue. Electrical stuff isn't my strong suit so I'm not sure what to look for in fixing this problem.

06-20-2019, 06:37 PM	#1
flash9376 Member Join Date: Jun 2010 Posts: 35	Light Switch question I know the settings for the light switch are supposed to be clockwise-parking, 1 counter clockwise-low and 2 counter clockwise- high, but all 3 of the settings turn on all the lights, i.e. powers both bulbs in the lamp and the tail lamp. My car is technically my dad's even though I;m the one who restored it and it's kept at his house. He tends to tinker around with things and I know he "rebuild" the light switch rod and reattached everything. They worked fine last summer but now that it's been tinkered with, I'm getting the above issue. Electrical stuff isn't my strong suit so I'm not sure what to look for in fixing this problem.