|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-02-2017, 01:40 PM | #21 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
Re: Undersized Kingpins .... NEW
At our shop we use a Sunnen piston pin machine to fit kingpins to new bushings. With the declining quality of replacement parts, using a reamer, as we used to do, usually results in an unacceptable fit. If you have a good machine shop in your area, take the spindles bushings, and pins there before you assemble them.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|