The Ford Barn

ronn · 09-27-2023, 06:42 AM

I am in need of the top 2 side rails and header for my wagon.

anyone know a wood worker who has a spare set (wishful thinking)
or a template to make them. Mine are powder post beetled. I will try and make them on my own, but thought I should ask here first.

most of the rest of the wood is salvageable.

Bruce of MN · 09-27-2023, 06:50 AM

Maybe help on in the Early V8 forum?

ronn · 09-27-2023, 07:03 AM

Bruce, Im losing it!!!!!! LOL

Oldbluoval · 09-27-2023, 07:31 AM

Bruce, Im losing it!!!!!! LOL

We knew it all along! lol lol lol
Mine is past tense …I’ve lost it!!

Big hammer · 09-27-2023, 08:11 AM

The more places you ask for help the better chance of success!!! You never know where the help may come from

w.michael · 09-27-2023, 10:55 AM

Sponsored Links (Register now to hide all advertisements)

Try Classic Wood in Greensboro NC.

ronn · 09-27-2023, 10:55 AM

good point sledgehammer!

just ordered a flasher/alarm to put on my key ring, so I dont spend 2 hours a week looking for it!

ronn · 09-27-2023, 10:56 AM

I thought classic was chevy oriented? no..........

Oldbluoval · 09-27-2023, 01:40 PM

Check website
Classic wood Mfg …they are usually in Hershey
Like all, I understand their backlog is BAD

ronn · 09-27-2023, 01:42 PM

WELL THEY WROTE ME BACK- THEY MAKE no WAGON WOOD.

jwmckenzie · 09-28-2023, 07:07 AM

Mike Nickels from Traverse City, MI was moving into later wood for Woodies after he made a few Model A bodies. This was before his fire. Might give him a call. I will PM you his contact information.

Might also reach out to 'Sawzall' on this forum. I know he was working on some later model A wood. Don't have his contact info.

ronn · 09-28-2023, 03:45 PM

I spoke with Mike. all is good.

I did write sawzall, but difficult to get a response from him. he must be busy........

ModelA29 · 09-28-2023, 03:51 PM

There is a guy in the Los Angeles area who restores all years/makes of Woodies. I don't know his name/address but maybe the National Woodie Club or one of their chapters may put you in touch. https://woodies.clubexpress.com/cont...dule_id=302841

sawzall · 09-29-2023, 04:21 PM

Quote:

Originally Posted by ronn

I spoke with Mike. all is good.

I did write sawzall, but difficult to get a response from him. he must be busy........

You wrote me on monday, i saw it today and responded.. yes i have an original roof rail, yes i can make you one, no i will not loan out my pattern.

Good luck!

ronn · 09-29-2023, 05:35 PM

Thank you Sawzall. Mike is on it and hopefully we get it done.

09-27-2023, 06:42 AM	#1
ronn Senior Member Join Date: Feb 2011 Location: NNNNNNNNJJJJJJJJJJ Posts: 6,792	1936 ford woodie wood......... I am in need of the top 2 side rails and header for my wagon. anyone know a wood worker who has a spare set (wishful thinking) or a template to make them. Mine are powder post beetled. I will try and make them on my own, but thought I should ask here first. most of the rest of the wood is salvageable.

09-27-2023, 06:50 AM	#2
Bruce of MN Senior Member Join Date: May 2010 Location: VA Posts: 1,410	Re: 1936 ford woodie wood......... Maybe help on in the Early V8 forum?

09-27-2023, 07:03 AM	#3
ronn Senior Member Join Date: Feb 2011 Location: NNNNNNNNJJJJJJJJJJ Posts: 6,792	Re: 1936 ford woodie wood......... Bruce, Im losing it!!!!!! LOL

09-27-2023, 07:31 AM	#4
Oldbluoval Senior Member Join Date: Jun 2015 Location: Signal Mtn, TN (SE TN) Posts: 2,372	Re: 1936 ford woodie wood......... Bruce, Im losing it!!!!!! LOL We knew it all along! lol lol lol Mine is past tense …I’ve lost it!!

09-27-2023, 08:11 AM	#5
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,131	Re: 1936 ford woodie wood......... The more places you ask for help the better chance of success!!! You never know where the help may come from __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done

09-27-2023, 10:55 AM	#6
w.michael Senior Member Join Date: May 2010 Location: North Carolina Posts: 418	Re: 1936 ford woodie wood......... Sponsored Links (Register now to hide all advertisements) Try Classic Wood in Greensboro NC.

09-27-2023, 10:56 AM	#8
ronn Senior Member Join Date: Feb 2011 Location: NNNNNNNNJJJJJJJJJJ Posts: 6,792	Re: 1936 ford woodie wood......... I thought classic was chevy oriented? no..........

09-27-2023, 01:40 PM	#9
Oldbluoval Senior Member Join Date: Jun 2015 Location: Signal Mtn, TN (SE TN) Posts: 2,372	Re: 1936 ford woodie wood......... Check website Classic wood Mfg …they are usually in Hershey Like all, I understand their backlog is BAD

09-27-2023, 01:42 PM	#10
ronn Senior Member Join Date: Feb 2011 Location: NNNNNNNNJJJJJJJJJJ Posts: 6,792	Re: 1936 ford woodie wood......... WELL THEY WROTE ME BACK- THEY MAKE no WAGON WOOD.

09-28-2023, 07:07 AM	#11
jwmckenzie Senior Member Join Date: Feb 2014 Location: Boston, MA Posts: 213	Re: 1936 ford woodie wood......... Mike Nickels from Traverse City, MI was moving into later wood for Woodies after he made a few Model A bodies. This was before his fire. Might give him a call. I will PM you his contact information. Might also reach out to 'Sawzall' on this forum. I know he was working on some later model A wood. Don't have his contact info.

09-28-2023, 03:45 PM	#12
ronn Senior Member Join Date: Feb 2011 Location: NNNNNNNNJJJJJJJJJJ Posts: 6,792	Re: 1936 ford woodie wood......... I spoke with Mike. all is good. I did write sawzall, but difficult to get a response from him. he must be busy........

09-28-2023, 03:51 PM	#13
ModelA29 Senior Member Join Date: Sep 2022 Location: SoCal Posts: 591	Re: 1936 ford woodie wood......... There is a guy in the Los Angeles area who restores all years/makes of Woodies. I don't know his name/address but maybe the National Woodie Club or one of their chapters may put you in touch. https://woodies.clubexpress.com/cont...dule_id=302841

09-29-2023, 05:35 PM	#15
ronn Senior Member Join Date: Feb 2011 Location: NNNNNNNNJJJJJJJJJJ Posts: 6,792	Re: 1936 ford woodie wood......... Thank you Sawzall. Mike is on it and hopefully we get it done.