|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-29-2020, 12:33 PM | #1 |
Member
Join Date: Aug 2015
Posts: 34
|
51 f1 front brake backing plates
Hello all. The backing plates on this f1 are apparently right and left. Plates are bare back from the powdercoater. No part numbers visible. Any way to tell the difference? Both look the same to me. Thanks
Sent from my SM-G960U using Tapatalk |
04-29-2020, 12:54 PM | #2 |
Senior Member
Join Date: Aug 2010
Location: newark, delaware
Posts: 3,735
|
Re: 51 f1 front brake backing plates
Looking at the outside wheel cylinder leans toward 1 o'clock. On backwards the hose interferes with the top of the kingpin
|
Sponsored Links (Register now to hide all advertisements) |
|
04-29-2020, 01:34 PM | #3 |
Member
Join Date: Aug 2015
Posts: 34
|
Re: 51 f1 front brake backing plates
Thanks Skidmarks. That would have sucked to do it twice.
Sent from my SM-G960U using Tapatalk |
04-29-2020, 01:47 PM | #4 |
Senior Member
Join Date: Aug 2010
Location: newark, delaware
Posts: 3,735
|
Re: 51 f1 front brake backing plates
Should have said the right leans to 1 o clock and the left to 11 but its easy to tell holding them up
|
04-29-2020, 07:41 PM | #5 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 51 f1 front brake backing plates
Aren't they marked with an R and L on them? I would have to go look, but fairly sure there is an R or L stamped on the inside of the backing plates.
Last edited by JSeery; 04-29-2020 at 07:47 PM. |
04-29-2020, 08:06 PM | #6 |
Member
Join Date: Aug 2015
Posts: 34
|
Re: 51 f1 front brake backing plates
Sponsored Links (Register now to hide all advertisements)
Sent from my SM-G960U using Tapatalk |
|
|
Sponsored Links (Register now to hide all advertisements) |
|