|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-04-2019, 10:45 AM | #1 |
Senior Member
Join Date: May 2010
Location: Wheeling, WV - U.S.A.
Posts: 241
|
exhaust manifold coating
Anybody try one of the high-tech manifold coatings? If so, what has been your experience. Not talking here about fizz can paint jobs with barbecue paint, just the specialty shops, like Jet Coat, Cerama-Kote, etc.
Brian |
03-04-2019, 11:30 AM | #2 |
Junior Member
Join Date: Mar 2019
Location: Kingsville TX South Texas
Posts: 21
|
Re: exhaust manifold coating
Not Model A specific but I have used Jet Hot on motorcycle and car exhaust. It works very well and is very durable. It is also a little expensive. On something like a Model A exhaust manifold where they can get to the inside, it will be coated inside and out. You can get it in a variety of colors but I think the original silver is the most durable. I'm pretty sure Jet Hot is the original ceramic coater.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-04-2019, 02:07 PM | #3 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: exhaust manifold coating
Vermin sports a coating of "CAST-BLAST" that was "cured" for 2 YEARS. Looks as "NEW"-----
Bill Spraycan
__________________
"THE ASSISTANT GURU OF STUFF" |
03-04-2019, 03:08 PM | #4 |
Senior Member
Join Date: May 2010
Location: Shenandoah Valley Virginia
Posts: 220
|
Re: exhaust manifold coating
I had Jet Hot coat my headers about 25 years ago......lots of miles since and they still look as good as when they were coated. Also.....easy to keep clean. But they were pricey to have done.
|
03-04-2019, 06:52 PM | #5 |
Senior Member
Join Date: May 2010
Location: Durango CO
Posts: 1,309
|
Re: exhaust manifold coating
Jet-Hot done 30 years ago. Not cheap, but worth every penny.
__________________
No restorable Model A's were harmed in the building of this truck! |
03-04-2019, 07:06 PM | #6 |
Senior Member
Join Date: May 2010
Location: Wheeling, WV - U.S.A.
Posts: 241
|
Re: exhaust manifold coating
Sponsored Links (Register now to hide all advertisements)
Brian |
03-04-2019, 08:41 PM | #7 |
Senior Member
Join Date: Sep 2017
Location: Albuquerque
Posts: 162
|
Re: exhaust manifold coating
|
03-04-2019, 10:55 PM | #8 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,354
|
Re: exhaust manifold coating
Pot 15 manifold grey works pretty good.
|
03-05-2019, 01:28 AM | #9 |
Senior Member
|
Re: exhaust manifold coating
A friend had the exhaust on a 350 King Air done in silver, it seemed to hold up very well
(Jet Hot Coating) |
03-05-2019, 04:41 AM | #10 |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,159
|
Re: exhaust manifold coating
If you want to have silver, zinc spray can is very suitable for electrical welding of zinc. this is what the industry needs because it is conductive. Lasts for years on hot exhaust pipes.
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
03-05-2019, 08:34 AM | #11 |
Senior Member
Join Date: Jan 2016
Posts: 2,101
|
Re: exhaust manifold coating
|
03-05-2019, 11:48 AM | #12 |
Senior Member
Join Date: Aug 2016
Location: Alberta
Posts: 930
|
Re: exhaust manifold coating
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|