Oil filter lid gasket

[41panelmark]

My 41 24 stud engine has a filter mounted on the left head and the lid has a small round gasket inside. Anyone know where to find a new one?

[Ross in East Texas]

Don't new gaskets not still come with the filters?

[41panelmark]

Well apparently not the ones from Mac. nothing in the box.

[Ross in East Texas]

Oh yeah, I am sure the suppliers would charge extra for that. I remember that Fram used to include them with their filters.

[Kube]

Napa #1006, WIX #51006, Fram #C4, Ford #7Ha6731a... all come with a new gasket.

Originally Posted by 41panelmark

Well apparently not the ones from Mac. nothing in the box.

[Kube]

Sponsored Links (Register now to hide all advertisements)

Ross, Is that your coupe (in the picture to the left)?

Originally Posted by Ross in East Texas

Don't new gaskets not still come with the filters?

[41panelmark]

Thanks anyhow. This was my first post on the new forum, need to figure it all out How did you get your car to show on the posts in the corner?

[41panelmark]

Thanks for the filter numbers, just got my new engine in. I will head to the parts store and see if I can get another. I appreciate it.

[Dennis/Arkansas]

Hey Mark, To get a picture in the corner of your post go to "USER CP" in the bar at the top of this page and click on it. There you will see "EDIT AVATAR". Click on that and download a pic from your computer. Took me a long time to figure out what an Avatar was (they don't exist here in Arkansas!). Dennis

[Cecil/WV]

Yes, Mark, get that truck on here.

[Ross in East Texas]

Originally Posted by Kube

Ross, Is that your coupe (in the picture to the left)?

Yes, I have owned this car since 1965 when I bought it from the original owner. I drove this car to the last year of high school and the first two semesters of college. It was 150 miles from home to college and about 75 of this was Interstate. I always ran posted speeds (70 + MPH) and she never gave me any problems.
I am currently doing a complete frame off on her. I had the frame powder coated (60% gloss black) and now have the wheels on her and am beginning to put back the smaller parts prior to beginning the body.