|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
12-06-2019, 12:31 PM | #1 |
Senior Member
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,654
|
40-41 Pickup Inner Fender Panels
Do the truck inner fender panels bolt up in the same holes as say a 37 car frame?
Just mocking things up on my project ..... Thanks for any help you can give ..... |
12-06-2019, 12:52 PM | #2 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,759
|
Re: 40-41 Pickup Inner Fender Panels
Do you have the big V shaped support? That is what the whole front clip rides on. The lower edges of the inner fenders only bolt on at one (or is it two) points. Nothing at the forward end, other than the attachment to the V shaped brace.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-06-2019, 01:03 PM | #3 |
Senior Member
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,654
|
Re: 40-41 Pickup Inner Fender Panels
Well, there are two holes around the brake line opening and one in the back towards the cab .....
This is not a stock build - no “V” shaped support ..... |
12-06-2019, 01:41 PM | #4 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,117
|
Re: 40-41 Pickup Inner Fender Panels
Tom....In this pic you'll note the angle iron fender-support bracket(s) that Jim Pullen (19Fordy) made to preclude the use of the "V" support fixture on his slick, black coupe. DD
|
12-06-2019, 02:00 PM | #5 |
Senior Member
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,654
|
Re: 40-41 Pickup Inner Fender Panels
Thank you V8Coopman ......
|
12-06-2019, 02:07 PM | #6 |
Senior Member
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,654
|
Re: 40-41 Pickup Inner Fender Panels
Sponsored Links (Register now to hide all advertisements)
Thank you all for your responses and to HamtiwnAl and 41fordpickup ..... When I sold my coupe I lost my reference vehicle and now that I am back on this pickup I am lost! Lol! |
12-06-2019, 04:40 PM | #7 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,042
|
Re: 40-41 Pickup Inner Fender Panels
The two holes near the brake line use the rubber bumpers. The far back hole uses a 5/16 bolt
|
12-06-2019, 09:58 PM | #8 |
Senior Member
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,654
|
Re: 40-41 Pickup Inner Fender Panels
Thanks, TJ ......
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|