|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-06-2016, 10:38 AM | #1 |
Member
Join Date: Jul 2013
Location: New Orleans
Posts: 94
|
62 ford power steering
hooked up the pwr steering from the 460 engine pump to control valve. rebuilt slave cylinder. have pwr steering one way, to the left but not to right. when I first started eng the steering went into oscillation. shut engine down and turned steering fully to right then fully to left two times. restarted eng oscillation stopped. now have steering to the left but when I try to turn to the right I have great resistance. HELP Please.
|
08-06-2016, 11:47 AM | #2 |
Senior Member
Join Date: May 2010
Location: The Inland Empire of Washington State
Posts: 368
|
Re: 62 ford power steering
make sure the 2 hoses to the slave aren't reversed
|
Sponsored Links (Register now to hide all advertisements) |
|
08-06-2016, 12:14 PM | #3 |
Senior Member
Join Date: Mar 2013
Location: Kent, WA. Tucson, AZ
Posts: 1,398
|
Re: 62 ford power steering
X2. I hooked one up backwards one time and the steering wheel ripped out of my hands, went to full lock, and then blew the seal out of the control valve. 2 quarts on the floor before I could shut it off.
If that isn't it, I'd be looking at a faulty control vavle. I'm assuming it's a ram system on the drag link. |
08-06-2016, 04:36 PM | #4 |
Member
Join Date: Jul 2013
Location: New Orleans
Posts: 94
|
Re: 62 ford power steering
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|