|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-18-2024, 08:23 PM | #1 |
Member
Join Date: Mar 2013
Location: Montgomery Alabama
Posts: 71
|
Crane 400 Cam and a AL-1 cam
Hello looking for info on these two cams what do they compare to thanks
|
05-21-2024, 08:30 AM | #2 |
Senior Member
Join Date: May 2010
Location: Rogersville, TN
Posts: 803
|
Re: Crane 400 Cam and a AL-1 cam
Bttt
Last edited by hotrodA; 05-22-2024 at 09:07 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
05-22-2024, 04:37 PM | #3 |
Member
Join Date: May 2010
Location: PETALUMA CALI
Posts: 94
|
Re: Crane 400 Cam and a AL-1 cam
Crane Cam F H Ford no 400 STD Tappet Super Track and drags . 404 LIFT In open-close 26-70 Ex open-close 72-24 Advertised Dur 276 Dur at .050 IN-EX 242 . Run Clearance IN .014 EX .016 Gross Valve LIFT . 404. Part No 32-41 37024 42-48 38024 49-53 39024 .
|
05-22-2024, 07:40 PM | #4 |
Member
Join Date: Mar 2013
Location: Montgomery Alabama
Posts: 71
|
Re: Crane 400 Cam and a AL-1 cam
Thank you
|
05-22-2024, 07:43 PM | #5 |
Senior Member
Join Date: May 2010
Location: Rogersville, TN
Posts: 803
|
Re: Crane 400 Cam and a AL-1 cam
Wow! Thanks, @F1 Mike!
|
05-23-2024, 09:19 AM | #6 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,915
|
Re: Crane 400 Cam and a AL-1 cam
Sponsored Links (Register now to hide all advertisements)
Gramps |
05-23-2024, 01:20 PM | #7 |
Member
Join Date: May 2010
Location: PETALUMA CALI
Posts: 94
|
Re: Crane 400 Cam and a AL-1 cam
CRANE Radius Tappet grind R-450 Acceleration Drags Hi RPM. In Open-Close 34-70 Ex Open- Close 76-28 Advertised Duration 284 At .050 247 In-ex .012 - .014 clearance Gross valve Lift IN .450 EX .450
|
05-23-2024, 01:30 PM | #8 |
Junior Member
Join Date: Oct 2023
Location: Canuckistan
Posts: 28
|
Re: Crane 400 Cam and a AL-1 cam
what idle speed would that run at?
Estimated vacuum hg at idle? |
05-23-2024, 03:26 PM | #9 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,250
|
Re: Crane 400 Cam and a AL-1 cam
Does anybody actually have one of these cams? I'd love to replicate it or try it!
|
05-23-2024, 03:38 PM | #10 |
Member
Join Date: Mar 2013
Location: Montgomery Alabama
Posts: 71
|
Re: Crane 400 Cam and a AL-1 cam
yes i know where one is NOS
|
05-24-2024, 07:30 AM | #11 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,250
|
Re: Crane 400 Cam and a AL-1 cam
I used to run a cam that Tom Hutchinson called the "Awful Awful". It was a .450 lift flat tappet grind that Erson once made. Somehow I "lost" the damn thing over the years - have looked for it many times and it refuses to rear its awful head.
I'd be interested in looking at a big radius grind and seeing how it would run with a blower - that could be fun! If you happen to know of somebody who would part with one (and hopefully has the Crane radius lifters to go with it as they are a different radius than Isky's if I am correct), I'd be interested in trying "Awful #2"! LOL PS: I used to know Harvey Crane and sent him my original Potvin 425 for him to do some analysis on it. He used his super high-dollar cam software to rework the profile so the lifter didn't "run off the edge" and was going to grind me an "improved" version. Then Harvey passed and my original 425 went with him . . . I never got it back from those handling his estate. Damnation! |
05-24-2024, 07:52 AM | #12 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,275
|
Re: Crane 400 Cam and a AL-1 cam
I'd have think that south of the Mason Dixon line there are a lot of old Crane cams sitting in garages, old shops, etc. I'd love the try one as well.
|
05-24-2024, 08:53 AM | #13 |
Member
Join Date: May 2010
Location: PETALUMA CALI
Posts: 94
|
Re: Crane 400 Cam and a AL-1 cam
THAT Info was from my old Winner's Hand Book 1971. Chase Knight on the HAMB worked for Crane Cam for years nice guy look him up.
|
05-24-2024, 09:38 AM | #14 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,250
|
Re: Crane 400 Cam and a AL-1 cam
Interesting Story on Harvey Crane: Most of us remember the "cam wars" and it is easy to have the impression that guys like Harvey Crane and Ed Iskenderian must have had little respect for each other and never did business together. Harvey told me the opposite was true - that he had a lot of respect for Ed and they did quite a bit of business together.
Harvey said to me "Ed was just about the only guy that when we did business together, I never questioned if he had the money or would pay his bills. He always paid on time - I completely trusted his word." |
05-25-2024, 06:56 AM | #15 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,915
|
Re: Crane 400 Cam and a AL-1 cam
B&S, is that the cam I sold you???? That came from a junkyard inder new management and all the OLD stuff was being scrapped. I got there just at the right time.
Gramps PS ran a crane cam in a 392 Hemi, Nice!! |
05-25-2024, 10:52 AM | #16 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,250
|
Re: Crane 400 Cam and a AL-1 cam
Hey Ol' Ron - That was a Potvin 400 Climax if I recall . . . I don't have a single Crane cam in my stash! LOL
|
05-26-2024, 09:02 PM | #17 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,915
|
Re: Crane 400 Cam and a AL-1 cam
OK glad you liked it. My friend that made the L-100 (can;t remember his nane) worked for Harvy, so I had a little inside info. At 91+ my memory os tost.
G |
05-27-2024, 11:06 AM | #18 |
Senior Member
Join Date: May 2010
Location: Star, MS
Posts: 4,030
|
Re: Crane 400 Cam and a AL-1 cam
|
05-27-2024, 06:15 PM | #19 |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,991
|
Re: Crane 400 Cam and a AL-1 cam
|
05-28-2024, 06:11 PM | #20 |
Senior Member
Join Date: May 2010
Location: Rogersville, TN
Posts: 803
|
Re: Crane 400 Cam and a AL-1 cam
From the Delta Cams box for the AL-1
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|