The Ford Barn

1930deluxe · 11-26-2017, 08:57 PM

I took pictures of my 1930 tudor sedan, the drivers splash shield which has several hole in it. Did the shield come with this many holes or has it been molested over time? I don't know what happened the pictures were there to start with. I may have missed saving them. See reply below.

Larry Jenkins · 11-26-2017, 09:46 PM

Do you mean "splash aprons?" If so, do you mean the front apron or the running board aprons?

Y-Blockhead · 11-27-2017, 01:02 AM

Quote:

Originally Posted by 1930deluxe

I took pictures of my 1930 tudor sedan, the drivers splash pan which has several hole in it. Did the pan come with this many holes or has it been molested over time?

Where's the pictures??

1930deluxe · 11-27-2017, 08:10 PM

I took pictures of my 1930 tudor sedan, the drivers splash shield which has several hole in it. Did the shield come with this many holes or has it been molested over time?

J Franklin · 11-27-2017, 08:33 PM

It looks about right with some slight damage to one. Don't worry that side is not seen.

Big hammer · 11-28-2017, 03:22 AM

Sponsored Links (Register now to hide all advertisements)

Compare both sides, should have the same number of holes, and in the same area except opposite. To me it looks like there is wild hole thats also broken out.

Steve Plucker · 11-28-2017, 05:22 AM

Two outside holes are for attachment to the frame with bolts, lock and flat washers, and nuts...the larger hole is for the side mount spare tire bracket...and the five 1/2 type holes are where the rivets protrude from the frame. Set it on the frame and check it out!

Pluck

1930deluxe · 11-28-2017, 07:46 PM

Thank you for your response it is very helpful with my first Ford to know what should or should not be on the car.

11-26-2017, 08:57 PM	#1
1930deluxe Senior Member Join Date: Oct 2017 Location: Garretson S.D. Posts: 114	1930 Tudor splash pan I took pictures of my 1930 tudor sedan, the drivers splash shield which has several hole in it. Did the shield come with this many holes or has it been molested over time? I don't know what happened the pictures were there to start with. I may have missed saving them. See reply below. Last edited by 1930deluxe; 11-27-2017 at 08:17 PM. Reason: splash shield not pan

11-26-2017, 09:46 PM	#2
Larry Jenkins BANNED Join Date: Feb 2015 Location: East Central Iowa Posts: 1,275	Re: 1930 Tudor splash pan Do you mean "splash aprons?" If so, do you mean the front apron or the running board aprons? __________________ Good enough.. Isn't.

11-27-2017, 08:33 PM	#5
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 5,963	Re: 1930 Tudor splash pan It looks about right with some slight damage to one. Don't worry that side is not seen.

11-28-2017, 03:22 AM	#6
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,131	Re: 1930 Tudor splash pan Sponsored Links (Register now to hide all advertisements) Compare both sides, should have the same number of holes, and in the same area except opposite. To me it looks like there is wild hole thats also broken out. __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done

11-28-2017, 05:22 AM	#7
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Re: 1930 Tudor splash pan Two outside holes are for attachment to the frame with bolts, lock and flat washers, and nuts...the larger hole is for the side mount spare tire bracket...and the five 1/2 type holes are where the rivets protrude from the frame. Set it on the frame and check it out! Pluck

11-28-2017, 07:46 PM	#8
1930deluxe Senior Member Join Date: Oct 2017 Location: Garretson S.D. Posts: 114	Re: 1930 Tudor splash pan Thank you for your response it is very helpful with my first Ford to know what should or should not be on the car.