04-02-2024, 10:49 PM | #21 |
Senior Member
Join Date: May 2010
Posts: 2,603
|
Re: Oil Pump Shaft
...
|
04-05-2024, 09:57 AM | #22 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,486
|
Re: Oil Pump Shaft
Here is the Service Bulletin regarding the undercut oil pump shaft. There is a picture of B-6608 Undercut Shaft on Vince Falter's Ford Barn https://www.fordgarage.com/pages/boilpumpshaft.htm
__________________
Bob Bidonde Last edited by Bob Bidonde; 04-05-2024 at 10:05 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
04-05-2024, 12:11 PM | #23 | |
Senior Member
Join Date: Mar 2012
Location: Ohio
Posts: 1,988
|
Re: Oil Pump Shaft
Quote:
|
|
04-07-2024, 11:50 AM | #24 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,455
|
Re: Oil Pump Shaft
I like the early forged body pumps (A-6600-B1). The cast iron ones love to crack.
Last edited by rotorwrench; 04-07-2024 at 11:57 AM. |
04-07-2024, 05:47 PM | #25 | |
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,059
|
Re: Oil Pump Shaft
Quote:
This has been my concern with modified V8 pumps for the model A. The housing was never made for this and he castings too thin. I made a few billet alum adaptors for V8 pumps that will never break. John
__________________
As Carroll Smith wrote; All Failures are Human in Origin. |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|