|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-03-2019, 09:57 AM | #1 |
Senior Member
Join Date: Jul 2010
Location: upstate NY near Mass border
Posts: 789
|
Interior trim nailing material
When I removed the interior rear side panels ( the ones that fit in the curve in the rear corners) I found that there is a channel that holds some sort of material up at the top of these curved panels which I assume is for holding the nails that hold the side panels. Does anyone know what that material is and what to do to replace the deteriorated core of these channels? My car is a 31 tudor. Jack (thanks in advance)
|
10-03-2019, 01:05 PM | #2 |
Senior Member
Join Date: Jul 2010
Location: upstate NY near Mass border
Posts: 789
|
Re: Interior trim nailing material
btt.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-03-2019, 01:26 PM | #3 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,376
|
Re: Interior trim nailing material
I have used upholstery panel board or leather strips before
Cut to width and glued and laminated to get to the correct thickness |
10-03-2019, 02:01 PM | #4 |
Senior Member
Join Date: May 2010
Location: Tacoma, WA
Posts: 1,027
|
Re: Interior trim nailing material
Classtique upholstery has a small tutorial on their website on this. I do what Oldbluoval does. They do make a flexible plastic material that I have also used. Check with an auto upholstery shop.
|
10-03-2019, 02:45 PM | #5 |
Senior Member
Join Date: Jun 2010
Posts: 416
|
Re: Interior trim nailing material
Sponsored Links (Register now to hide all advertisements)
__________________
Wanted flathead speed equipment Thanks |
|
|
Sponsored Links (Register now to hide all advertisements) |
|