The Ford Barn

rjlester · 04-14-2024, 04:08 PM

Need to replace the grommet and might as well change the booster check valve on my 1968 Cyclone GT. Cannot find a listing or confirm a Dorman number anywhere with specs. The hole on the booster is 1 inch, and the check valve is .85 of an inch.

If I can get a Dorman part number or another brand, I could likely buy locally. The check valve still works so I'm more worried about the grommet at the moment.

I found a Dorman part number: 80191 but there are no specs on size at all even on the Dorman website. Cannot confirm if this will fit.

KULTULZ · 04-14-2024, 05:24 PM

Sponsored Links (Register now to hide all advertisements)

DORMAN is off-shore.

- https://www.npdlink.com/product/powe...k-valve/205445

04-14-2024, 04:08 PM	#1
rjlester Senior Member Join Date: Aug 2022 Posts: 247	Power brake booster grommet - 1968 Merc. Need to replace the grommet and might as well change the booster check valve on my 1968 Cyclone GT. Cannot find a listing or confirm a Dorman number anywhere with specs. The hole on the booster is 1 inch, and the check valve is .85 of an inch. If I can get a Dorman part number or another brand, I could likely buy locally. The check valve still works so I'm more worried about the grommet at the moment. I found a Dorman part number: 80191 but there are no specs on size at all even on the Dorman website. Cannot confirm if this will fit.

04-14-2024, 05:24 PM	#2
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A 'GALAXIE' FAR FAR AWAY Posts: 6,491	Re: Power brake booster grommet - 1968 Merc. Sponsored Links (Register now to hide all advertisements) DORMAN is off-shore. - https://www.npdlink.com/product/powe...k-valve/205445 __________________ ***** We should have a contest. The player has to start at the very last post of a thread & then try to guess what the OP's original question was about ...