The Ford Barn

Ronnie Lawson · 09-24-2018, 08:16 AM

20180519_151648.jpg This is my Weber setup.

Corley · 09-24-2018, 09:04 AM

Quote:

Originally Posted by Ronnie Lawson

Attachment 374869 This is my Weber setup.

Can you say "Over Carb'd"? But, great fun and lot's of bling...

Ronnie Lawson · 09-24-2018, 09:08 PM

The engine has a Eubank cast nodular (ductile) iron model B balanced crank, in a Model A block. Model B cam, inserted bearings, pressurized oil on all bearings, Stipe/Specialty Cam Hi volume oil pump for A/B engine, 25 lb. aluminum flywheel, 1939 Ford transmission with a Borg Warner overdrive. The intake is what I don’t know the manufacture of.

09-24-2018, 08:16 AM	#1
Ronnie Lawson Senior Member Join Date: May 2010 Location: Columbus, IN Posts: 158	Re: Weber carburetors 20180519_151648.jpg This is my Weber setup.

09-24-2018, 09:08 PM	#3
Ronnie Lawson Senior Member Join Date: May 2010 Location: Columbus, IN Posts: 158	Re: Weber carburetors The engine has a Eubank cast nodular (ductile) iron model B balanced crank, in a Model A block. Model B cam, inserted bearings, pressurized oil on all bearings, Stipe/Specialty Cam Hi volume oil pump for A/B engine, 25 lb. aluminum flywheel, 1939 Ford transmission with a Borg Warner overdrive. The intake is what I don’t know the manufacture of.