|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-15-2018, 09:58 AM | #1 |
Senior Member
Join Date: May 2010
Location: Innisfil, Ontario Canada
Posts: 1,174
|
Late 31 Cabriolet Run Channels
Hi Guys:
I'm working on a late 31 Cabriolet with "Steel Doors" My question is? How are the window run channels held into the channels? Are they like a coupe and use the metal clips on the top and bottom or are they glued in or just work on friction. Pictures from the "Cabriolet Guys" would be great. Thanks John Poole |
07-15-2018, 03:54 PM | #2 |
Senior Member
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,998
|
Re: Late 31 Cabriolet Run Channels
John
Glad you ask.... I will have that job ahead of me as well when I get going on mine. I got window channels from bill Underwood |
Sponsored Links (Register now to hide all advertisements) |
|
07-16-2018, 05:09 AM | #3 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,372
|
Re: Late 31 Cabriolet Run Channels
Yes I have them and some other a400 and cabby parts
[email protected] for list |
07-16-2018, 08:35 PM | #4 |
Senior Member
Join Date: May 2010
Location: Innisfil, Ontario Canada
Posts: 1,174
|
Re: Late 31 Cabriolet Run Channels
Thanks for the posting guys but I'm looking for info. Pictures anything that will help to install the channels. I have the channels.
JP |
07-17-2018, 05:08 AM | #5 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,372
|
Re: Late 31 Cabriolet Run Channels
There are three screw holes in the channels and three d-nuts in the door
You simply attach the long channel with the theee screws 6-32 flat head as I recall One in the bend and two toward each end |
07-17-2018, 06:50 AM | #6 |
Senior Member
Join Date: May 2010
Location: Innisfil, Ontario Canada
Posts: 1,174
|
Re: Late 31 Cabriolet Run Channels
Sponsored Links (Register now to hide all advertisements)
|
07-17-2018, 08:46 AM | #7 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,372
|
Re: Late 31 Cabriolet Run Channels
If you have original channels, the screw holes are almost always broken out. Then it's impossible to put a small screw to hold them. I have no solution for that unless some washer-type set up. You can't weld on them as the felt would burn.
|
07-18-2018, 06:32 AM | #8 |
Senior Member
Join Date: May 2010
Location: Innisfil, Ontario Canada
Posts: 1,174
|
Re: Late 31 Cabriolet Run Channels
I have new channels. The trick is are they going to work.
|
07-19-2018, 07:22 AM | #9 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,372
|
Re: Late 31 Cabriolet Run Channels
PM sent
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|