|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-31-2012, 04:07 PM | #1 |
Senior Member
Join Date: May 2010
Location: Richmond, VA
Posts: 882
|
Spring clamp hardware
City:
Richmond
State:
Va
These are for the ‘clamp’ that holds the spring leaves together, not the spring-to-frame 'clip'.
Front Spring: 2 BOLTS: square headed (1/4”-20 x 2-3/8”), with special shoulder 2 NUTS: 1/4-20 hex nut {special 3/16” thick x 1/2” wide} Rear Spring: 2 BOLTS: square headed (1/4”-20 x 2-7/8”) with special shoulder 2 NUTS: 1/4-20 hex nut {special 3/16” thick x 1/2” wide} plz email me direct [email protected] (always looking for other E28 items) Last edited by Charles Reese; 03-31-2012 at 05:06 PM. |
11-16-2016, 12:03 AM | #2 |
Senior Member
Join Date: May 2010
Location: Richmond, VA
Posts: 882
|
Re: Spring clamp hardware
Sponsored Links (Register now to hide all advertisements)
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|