Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-03-2013, 04:00 PM   #1
Royal Ryser
Senior Member
 
Join Date: May 2010
Location: Colorado
Posts: 553
Default OK at idle, no acceration

THIS IS ROUND TWO!
36 distributor on a 59AB engine. Helmut distributor and coil rebuilt by Skip, new condenser, new plugs, new plug wires, rebuilt carb and fuel pump, new battery and cables, new ignition resistor.

Engine starts easily and idles well. Excellent fire to the plugs. I have tried a different carb. The plugs are in the right holes. I checked the auto advance mechanism; the piston is properly lubricated and moves freely. It seems to be set properly. The vac line is new condition and there is vacuum at the distributor. I moved the timing adjustment both directions as far as it will go. The engine runs best fully advanced.

What do I do now? I've tried everything I can think of after reviewing what many others have done. HELP1

Royal Ryser
Royal Ryser is offline   Reply With Quote
Old 08-03-2013, 04:24 PM   #2
Royal Ryser
Senior Member
 
Join Date: May 2010
Location: Colorado
Posts: 553
Default Re: OK at idle, no acceration

Well, damn! I posted this thing twice. Sorry.
Royal Ryser
Royal Ryser is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-03-2013, 04:46 PM   #3
Planojc
Senior Member
 
Planojc's Avatar
 
Join Date: May 2010
Location: Plano, Texas
Posts: 848
Default Re: OK at idle, no acceration

Sponsored Links (Register now to hide all advertisements)
Is the accelerator pump squirting gas down the carb?
Planojc is online now   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:52 AM.