The Ford Barn

lautens · 09-04-2017, 08:13 PM

Bendix hangs up on ring gear. Thought I resolved it by adding a shim. Drove the car on a one week tour and never had any problems. Tonight went on a 15 mile dive, stopped for supper and of course tonight it hung up. With the limited tools I had with me I got it unbolted, but it usually won't let go without some persuasion. But no punch or hammer tonight. Put in neutral and used the crank handle and gave it a yank and it let go. Put it back together and it's good to go again. Someone once told me that a Ford 9N Bendix will work better. Any suggestions other than tearing out the motor?

09-04-2017, 08:13 PM	#1
lautens Junior Member Join Date: Dec 2016 Location: ontario Posts: 12	1931 Model A starter Bendix hangs up on ring gear. Thought I resolved it by adding a shim. Drove the car on a one week tour and never had any problems. Tonight went on a 15 mile dive, stopped for supper and of course tonight it hung up. With the limited tools I had with me I got it unbolted, but it usually won't let go without some persuasion. But no punch or hammer tonight. Put in neutral and used the crank handle and gave it a yank and it let go. Put it back together and it's good to go again. Someone once told me that a Ford 9N Bendix will work better. Any suggestions other than tearing out the motor?