Coupe parcel tray

[quickchange]

I have two 30-31 coupe parcel trays , One is 6" tall the other 5" tall,also the two end mounting brackets are different, one being taller than the other, This would make the tray hang lower , WHY , What is the difference between a standard one & one for a wind down rear window , These are both the same width, Would a wind down rear parcel tray be narrower ,?? Too accommodate the wind down tray & glass, Can,t work out how to put picture on , Thanks Derek in a nice autumn NZ

[Bick in New Zealand]

The '31 wind down window parcel shelf is narrower and has holes etc for mechanism

[quickchange]

Justin how much narrower ""like front to back measurement , also how tall is the upstand at the back ? got 3 here , two at %' & one at 6" neither has provision for winder mechanism , also 3rd one has outside mounting tags bent at right angles not vertical ,

[quickchange]

So can no one tell me if the deluxe wind down rear window parcel tray measurements are different from a standard on ? who has one they can just measure the width?? Thanks

[jukenut 16]

Hi Derek, I didn't have a shelf so made one to convert to wind down window without modifying stock window wood depth, so not factory measurements.
Page 57 of ''How to restore your model A '' volume 4 gives some measurements and different shelfs. Apparently there were 2 heights ,6'' or 7 1/2'' below window, 5'', 5 1/2'' and 6'' width at center.

[quickchange]

Sponsored Links (Register now to hide all advertisements)

Jukenut 16 Thanks for the info , So where are you in kiwiland ?

[jukenut 16]

Originally Posted by quickchange

Jukenut 16 Thanks for the info , So where are you in kiwiland ?

Derek, I'm one of your customers....Ron from Wainuiomata

[quickchange]

Ron found the article, Thanks for reference , With out a picture ,or location ,One never knows who they are talking too, Thanks