|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-08-2024, 06:10 PM | #1 |
Member
Join Date: Mar 2022
Posts: 35
|
1935 pickup radiator still looking
Anybody have info on measurements for 1935 pickup radiator. Seen lots of pics but none with measurements. Need over all height and width. Thanks
|
01-08-2024, 10:34 PM | #2 |
Senior Member
Join Date: May 2010
Location: Fairfax Station, VA
Posts: 529
|
Re: 1935 pickup radiator still looking
Here's the Ford Engineering drawing for the Model 51 truck radiator. The only difference for a pickup is the bottom radiator hose fittings slant up instead of the ones in the drawing which point downward.
__________________
1935 157" 1 1/2 ton stake truck undergoing full original restoration 1936 131 1/2" panel truck rescue preservation Author of the 1935-1936 Ford Model 51 V8 Truck book published by the Early Ford V8 Club of America |
Sponsored Links (Register now to hide all advertisements) |
|
01-09-2024, 11:53 AM | #3 |
Member
Join Date: Mar 2022
Posts: 35
|
Re: 1935 pickup radiator still looking
thanks for the pic just couldnt read the numbers made a print and used magnifying glass just couldnt see. Would you mind giving me the height from from top of tank to bottom and width with out side brackets. Thanks again!
|
01-09-2024, 12:03 PM | #4 |
Senior Member
Join Date: May 2010
Location: Fairfax Station, VA
Posts: 529
|
Re: 1935 pickup radiator still looking
Top of radiator to bottom of feet is 29.34"
Width between holes in feet is 21" and width of core is 19.75"
__________________
1935 157" 1 1/2 ton stake truck undergoing full original restoration 1936 131 1/2" panel truck rescue preservation Author of the 1935-1936 Ford Model 51 V8 Truck book published by the Early Ford V8 Club of America |
01-09-2024, 03:39 PM | #5 |
Member
Join Date: Mar 2022
Posts: 35
|
Re: 1935 pickup radiator still looking
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|