|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-17-2019, 06:56 PM | #1 |
Senior Member
Join Date: Dec 2011
Location: prescott, arizona
Posts: 214
|
Vicky rear fenders
The 1931 ford Vicky I have has had the rear fenders bobbed, do other model rear finders fit?
|
05-17-2019, 09:56 PM | #2 |
Junior Member
Join Date: Aug 2018
Location: Lebanon Tn
Posts: 23
|
Re: Vicky rear fenders
Sedan fenders will also work
|
Sponsored Links (Register now to hide all advertisements) |
|
05-18-2019, 08:30 AM | #3 |
Senior Member
Join Date: Dec 2011
Location: prescott, arizona
Posts: 214
|
Re: Vicky rear fenders
Thanks Lstinker
|
05-19-2019, 08:45 AM | #4 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,470
|
Re: Vicky rear fenders
These are the original fenders of my 190A to use as a guide. I am told that they are common to Fordors back thru 1929, and also common to the 400A Convertible Sedan. The fenders should have the dimple to clear some rivets protruding into the fender wells, but you could easily hammer dimples into fenders without them.
__________________
Bob Bidonde |
05-19-2019, 09:21 AM | #5 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: Vicky rear fenders
Bob the 29 rear fenders are not the same as 30-31, that said I have seen people install 29 rear fenders on 30-31 with some carving.
|
05-19-2019, 10:11 AM | #6 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Vicky rear fenders
Sponsored Links (Register now to hide all advertisements)
|
08-16-2019, 02:50 PM | #7 |
Senior Member
Join Date: Dec 2011
Location: prescott, arizona
Posts: 214
|
Re: Vicky rear fenders
Btt
|
08-17-2019, 03:46 PM | #8 |
Senior Member
Join Date: Apr 2011
Location: Milpitas, CA
Posts: 398
|
Re: Vicky rear fenders
The Victoria used 30-31 sedan fenders. Any sedan fender made after February 1931 had a dimple behind the rear fender bracket. It was added to clear a rivet on the 160 series sedan bodies.
If your Vicky was assembled after February of 1931 then technically it should have the dimple. See Page 13-9 of the 2016 restoration guidelines. To determine about when your car was assembled, take your engine number, if it is original to the vehicle, or frame number and figure what month it was made from the Restoration Guidelines or Steve Plucker's Web site. Then add 2-3 months to that date to estimate when your vehicle was assembled. My Victoria's original engine was made 2/17/1931 and my Vicky was assembled in late April or early May of 1931.
__________________
Bill Cilker, Jr Unrestored 190A Victoria 45B, 160B & 189A Victoria Association President |
08-17-2019, 10:10 PM | #9 | |
Senior Member
|
Re: Vicky rear fenders
Quote:
And if you want to torture yourself they sell the dimples as a patch panel that can be welded in.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|