|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-20-2014, 09:33 PM | #1 |
Member
Join Date: Mar 2013
Posts: 53
|
Where to find a distributor cap for Mallory dual point distributor
I am looking for a new cap for my Mallory dual point distributor for my A. Does anyone know where I might find one? I have most of the original, it was broken before I got it and I would like to try this thing out on my car.
|
04-20-2014, 09:46 PM | #2 |
Senior Member
Join Date: May 2010
Location: Englewood, Colorado
Posts: 1,372
|
Re: Where to find a distributor cap for Mallory dual point distributor
What Model Mallory is it?
|
Sponsored Links (Register now to hide all advertisements) |
|
04-20-2014, 09:54 PM | #3 |
Senior Member
Join Date: Mar 2013
Location: Australa Melbourne
Posts: 878
|
Re: Where to find a distributor cap for Mallory dual point distributor
Which model Mallory dizzy is it
if it is the later style try Sacramento Vintage Ford If early try So-Cal speed shop Cal I have also heard that Bosch have 1 that will work |
04-20-2014, 10:18 PM | #4 |
Member
Join Date: Mar 2013
Posts: 53
|
Re: Where to find a distributor cap for Mallory dual point distributor
Where do I look to find what model it is? I will post pictures in a moment
|
04-20-2014, 10:26 PM | #5 |
Member
Join Date: Mar 2013
Posts: 53
|
Re: Where to find a distributor cap for Mallory dual point distributor
Here are some pictures of it, its much larger than a stock Model A distributor. There is a part number on the bottom: 20104. Also shouldn't there be a pin like a stock distributor to keep it from rotating? or does it just slide in as is and the lock screw holds it in place?
|
04-20-2014, 10:33 PM | #6 |
Member
Join Date: May 2010
Location: Carlsbad, CA
Posts: 76
|
Re: Where to find a distributor cap for Mallory dual point distributor
Sponsored Links (Register now to hide all advertisements)
https://www.fordbarn.com/forum/showthread.php?t=44255 Hope this link helps. |
04-20-2014, 10:34 PM | #7 |
Member
Join Date: Mar 2013
Posts: 53
|
Re: Where to find a distributor cap for Mallory dual point distributor
Forgot to attach pics
|
04-20-2014, 10:44 PM | #8 |
Senior Member
Join Date: Mar 2013
Location: Australa Melbourne
Posts: 878
|
Re: Where to find a distributor cap for Mallory dual point distributor
Does it look like this
Locks in same as stock A/B Model dizzy |
04-20-2014, 10:47 PM | #9 |
Senior Member
Join Date: Mar 2013
Location: Australa Melbourne
Posts: 878
|
Re: Where to find a distributor cap for Mallory dual point distributor
You want the early style
|
04-21-2014, 09:58 AM | #10 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: Where to find a distributor cap for Mallory dual point distributor
Try "BUBBA" over on the EV8 forum.
Paul in CT |
04-21-2014, 01:49 PM | #11 |
Member Emeritus
Join Date: May 2010
Location: Madison, NJ
Posts: 5,230
|
Re: Where to find a distributor cap for Mallory dual point distributor
I think that is a super early Mallory...it has the seat for the electrolock.
First generation, released about '29, had that and also hooked to original advance as well as having centrifugal. This one lacks the manual advance but I think is super early, and what you have is likely all you will find! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|