|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-03-2014, 08:37 AM | #1 |
Junior Member
Join Date: Aug 2014
Posts: 14
|
1929 Ford Model A Coupe
Hi
Would like some help on location and installation of a brake light switch on the cross member. A picture sure would help me out. Thanks |
09-03-2014, 08:45 AM | #2 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,552
|
Re: 1929 Ford Model A Coupe
28-29 brake light switches are attached to the transmission tower. If you look at the pics in the catalogues you will see how it looks and where it attaches on the left side of the tower. You will also need the link and longer clevis pins. And welcome to the Barn.
Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
Sponsored Links (Register now to hide all advertisements) |
|
09-03-2014, 09:04 AM | #3 |
Junior Member
Join Date: Aug 2014
Posts: 14
|
Re: 1929 Ford Model A Coupe
Thanks for your help I appreciate it
|
09-03-2014, 03:12 PM | #4 |
Senior Member
Join Date: May 2010
Location: Stayton, Oregon
Posts: 3,806
|
Re: 1929 Ford Model A Coupe
Welcome to the Barn. Another point with the break switch is to make sure it is far enough to the front of the car so that when you put on the brake to it's max, you do not pull the rod that goes through the switch so that it then ends up inside the switch. If this does happen, then you will blow a fuse or get a short. Don't ask me how I know but I have been there and done that!
If this in not clear, PM me and I will clear it up.
__________________
Fred Kroon 1929 Std Coupe 1929 Huckster |
09-04-2014, 08:54 AM | #5 |
Junior Member
Join Date: Aug 2014
Posts: 14
|
Re: 1929 Ford Model A Coupe
Thanks for your help will try this.
|
09-04-2014, 01:43 PM | #6 |
Senior Member
Join Date: Jul 2014
Location: Chico,CA
Posts: 106
|
Re: 1929 Ford Model A Coupe
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|