need help spider gear at the ewnd of steering colum ee

[fredski]

what direction should it be in when light switch is in 6 oclock position

doing this now any body help me out

fredski

[fredski]

I put in a steering housing end plate and now can not get wiring bail
back on properly and when I get close light switch is not movable

fred

[Gooseloony]

6 o'clock= off, 5 o'clock =low beams, 4 o'clock= high beams, 7 o'clock= parking

[Gooseloony]

If it is repro switch housing and bail wire from what I've read from others the fit is not good and just have to keep working the bail wire until it fits/works properly.

[fredski]

Originally Posted by Gooseloony

6 o'clock= off, 5 o'clock =low beams, 4 o'clock= high beams, 7 o'clock= parking

I removed the spiderswitch at steering colum can I have put it on
180 off??? I want to know which way it should face when lite switch is
in 6 oclock position

fred

[Gooseloony]

Sponsored Links (Register now to hide all advertisements)

Spider tabs should be at 6 and 12 which will match slots in switch plate.

[fredski]

thanks every one for your help on this.

I removed the spider and turned it to make it run up and down direction
rather than horizontal and it slides now into bail fine

fredski thanks goose

[Jim M]

This should help. It did me

https://www.youtube.com/watch?v=BjHp...ature=youtu.be