The Ford Barn

OL JENNY · 01-25-2016, 07:35 PM

I have a post about relocation of a disconnect switch so the handle is in front of the drivers seat, but I have been advised previously to not mix subjects in my post so this is another topic on the switch issue. What do those of you who are switching the ground cable use for the extended cable. I know many available 12V cables are not as large as they need to be for a 6 volt system. I have an extra of the cable to run to the starter if using the negative side, and I think it will reach to the frame from the switch but are there pre-made cables to go from the positive battery post to the switch? Do you use a negative 6volt cable? This is probably a stupid question with a no brainer answer, but for now it escapes me. Thanks for the help.

01-25-2016, 07:35 PM	#1
OL JENNY Senior Member Join Date: Sep 2012 Location: Muscatine, IA Posts: 223	What cables for Disconnect Switch I have a post about relocation of a disconnect switch so the handle is in front of the drivers seat, but I have been advised previously to not mix subjects in my post so this is another topic on the switch issue. What do those of you who are switching the ground cable use for the extended cable. I know many available 12V cables are not as large as they need to be for a 6 volt system. I have an extra of the cable to run to the starter if using the negative side, and I think it will reach to the frame from the switch but are there pre-made cables to go from the positive battery post to the switch? Do you use a negative 6volt cable? This is probably a stupid question with a no brainer answer, but for now it escapes me. Thanks for the help.