|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-25-2013, 04:48 PM | #1 |
Member
Join Date: Aug 2010
Location: South Berwick,Maine
Posts: 59
|
tabs for wiring harness
I had my radiator recoded with an original style core but now it is missing the three tabs for the harness. Any thoughts as to how to replace them?
|
03-25-2013, 05:01 PM | #2 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,521
|
Re: tabs for wiring harness
Shear 3 pieces of brass and then solder them on.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-25-2013, 07:54 PM | #3 |
Senior Member
Join Date: Dec 2012
Location: coquitlam b.c. canada
Posts: 130
|
Re: tabs for wiring harness
I had the same problem, solution was to use a couple of small zap straps fed through the core and left loose.
|
03-25-2013, 08:09 PM | #4 | |
Senior Member
Join Date: Jul 2010
Location: Cow Hampshire
Posts: 4,188
|
Re: tabs for wiring harness
Quote:
Joe K
__________________
Shudda kept the horse. |
|
03-25-2013, 08:45 PM | #5 |
Senior Member
Join Date: May 2010
Location: Toronto, Ontario, Canada
Posts: 1,289
|
Re: tabs for wiring harness
I'd be taking it back to where you had the work done, and ask them to do it..... (for free of course)
|
04-07-2013, 01:59 PM | #6 |
Member
Join Date: Aug 2010
Location: South Berwick,Maine
Posts: 59
|
Re: tabs for wiring harness
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|