|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-22-2016, 07:00 AM | #1 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,319
|
ID of water outlets on pre-49 heads
Like the title says, I would like to get some input as to the inside diameter of the water outlets on pre 1949 Ford V8 heads. I would like the measurements for as many varieties of heads as possible; stock, aftermarket, cast iron and aluminum.
I need the information for a project I am contemplating. So if you have a head handy, could you throw a tape or caliper on it and let me know what it measures? Thanks. |
08-22-2016, 09:54 AM | #2 |
Senior Member
Join Date: May 2010
Location: Mt. Holly,NJ
Posts: 1,822
|
Re: ID of water outlets on pre-49 heads
Hose I.D. is 1 3/4".
|
Sponsored Links (Register now to hide all advertisements) |
|
08-22-2016, 10:03 AM | #3 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,319
|
Re: ID of water outlets on pre-49 heads
To make things clear, I need the ID of the outlet on the head, not the hose.
|
08-23-2016, 03:00 PM | #4 |
Senior Member
Join Date: May 2010
Location: Millersport, central ohio
Posts: 668
|
Re: ID of water outlets on pre-49 heads
1935 head ID opening is 1 7/8, pump is 1 1/2. On both head and pumps I find a variation of about 1/32 in.
|
08-26-2016, 03:08 AM | #5 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,319
|
Re: ID of water outlets on pre-49 heads
Surely someone out there has a 59A, 81A, Edelbrock, or Offenhauser out there they can throw a tape on.
|
08-26-2016, 07:34 AM | #6 |
Senior Member
Join Date: Jul 2010
Posts: 2,593
|
Re: ID of water outlets on pre-49 heads
Sponsored Links (Register now to hide all advertisements)
Martin. |
08-26-2016, 08:06 AM | #7 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: ID of water outlets on pre-49 heads
Modern Edelbrock 1.45 - 1.48
Last edited by JSeery; 08-26-2016 at 08:17 AM. |
08-26-2016, 09:31 AM | #8 |
Senior Member
Join Date: May 2010
Location: Louisiana
Posts: 866
|
Re: ID of water outlets on pre-49 heads
Pair of 81A (A) heads measure 1 9/16"
|
08-26-2016, 10:24 AM | #9 |
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 1,166
|
Re: ID of water outlets on pre-49 heads
59AB = 1.9 OD and 1.565 ID. The dimensions vary a bit due to the roughness of the casting.
|
08-26-2016, 10:37 AM | #10 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,319
|
Re: ID of water outlets on pre-49 heads
Thanks, guys, that's enough to get me started. Any others will be appreciated.
|
08-26-2016, 03:58 PM | #11 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Re: ID of water outlets on pre-49 heads
Navarro, new in 2006, bought them from Barney before he left us. ID 1.385". Have an old set of Navarro's, but can't get at them to measure yet. May have some stock ones, will check and report back.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|