|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 4,053
|
![]()
Any barner's done a 33/34 sedan roof insert replacement recently. I need the insert extrusion strip source?? ALSO the wood bows too!!! PM me OR email at [email protected]
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Posts: 4,582
|
![]()
Try Cubel Ford Wood in Utah for your top bows.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 4,053
|
![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2015
Posts: 8,614
|
![]()
Cubel Ford Wood > https://fordwood.com/
The Cubels Henry and Anna 2nd Generation Family Owned and Operated Phone: 435-749-0037 Fax: 435-687-9239 P.O. Box 1401 Huntington, Utah 84528 [email protected]
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Posts: 2,534
|
![]()
the metal, rounded nail strip was made in aluminum at one time. To bend it use a wood open pattern and lightly head it. Smokey acetylene flame will do. Newc
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,307
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 4,053
|
![]() |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Aug 2010
Location: East Boothbay, Maine
Posts: 282
|
![]()
I would think milling would be difficult at best. I believe the original steel molding was roller formed and the aluminum aftermarket molding was either formed or extruded.
Contact Mikes "A" Fordable parts. Their roof molding A473016 is a close look alike to the 34 molding but I think about 1/16" narrower. The 34 was 13/16" (+/-) The rubber insert is also available. |
![]() |
![]() |
![]() |
#9 |
Junior Member
Join Date: Feb 2023
Posts: 22
|
![]()
I'm in the same boat, unfortunately - in need of either OEM or aftermarket pieces.
__________________
WTB '33 Ford parts: * Sedan/Victoria front seat adjuster mechanism * Sedan/Victoria rear seat catch pieces (B-192921 and B-192964) * Sedan or Victoria roof tack strip (OEM or aftermarket) * Straight commercial (pickup) bumper '33/'34 or '35 (46-17757 or 68-17757) |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|